micromag questions

[stondroopy]

hi all ,will a micromag take any valve?(X,RT etc)barrels are autococker threaded correct?anything else different from you run of mill mag besides that there is no body rail combo goin on?thanks for any info
:)

[Muzikman]

They will take any valve except the original RT. The barrel is cocker threaded. If it's an older Micromag (gen 1 - Fixed barrel or Gen 2 - removable barrel, and the ball detent is not bolede with the body) then you have problems installing aftermarket grip frames as the sear pin will fall out (newer micromag models do not have this problem). Other than that, it's a mag.

[LUKE4696]

They will take any valve except the original RT. The barrel is cocker threaded. If it's an older Micromag (gen 1 - Fixed barrel or Gen 2 - removable barrel, and the ball detent is not bolede with the body) then you have problems installing aftermarket grip frames as the sear pin will fall out (newer micromag models do not have this problem). Other than that, it's a mag.

What he said. You should have no problem running any valve other than the original RT Banjo valve. And yes, it should take 'cocker barrels, which is great if you own a cocker as well ;) .
-Luke