Which barrel?

[ClassicMagAuto]

I was just wondering whats your opion on a good barrel for an automag classic with a ULE body? lightest/most accurate/etc...

thanks,
coray :ninja:

[xXHavokXx]

Dye TI

[VFX_Fenix]

Ultralight (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=CPC7Q9GJCXW7xJDpNEV769svNsPkS0qLZmM=?Pro ductID=bKesFAY7s3EAAAD3HSOlA_2t) (DYE) - All American (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=CPC7Q9GJCXW7xJDpNEV769svNsPkS0qLZmM=?Pro ductID=ZvmsFAY7va8AAAD3_SqlA_2t) (SP) - St!ffi (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=CPC7Q9GJCXW7xJDpNEV769svNsPkS0qLZmM=?Pro ductID=f8%2esFAY7BpYAAAD3NRKlA_2t) (S!te)

Stiffi being the lightest followed by the AA and Boomer. CP 2 piece is also pretty light and a solid performer in my experience.

[MonsterMag]

Lapco, Freak , boomy, AA , pipe , they are look and preform exellent :cheers:

[TDonovan]

Lapco... Loud yet very effective.

[RenagadeOfFunk]

One that has a good paint to barrel matchPERIOD

[LittlePaintballBoy]

No. Paint to barrel match isn't the only factor. I wish people would shut up about that being the only thing. You need a good barrel with a nice finish for it to even match with a paint.

Out of those 3 I would go with the Ultralite. I also really recommend the Speedline by Powerlyte, and the good ol' J&J ceramic :)

[ghideon]

Anything that says Lapco on it.

[vonort]

Hammer Head. Or a J&J ceramic or kit. (kit if you into that type of thing)

[mixwell2]

I run a J & J Edge kit on my mech mag. Light, accurate, good if you need to worry about self cleaning, plus its a kit so you can get a good paint to barrel match.