PDA

View Full Version : What gun to get



black tri star
10-12-2004, 09:32 PM
I have a thousand dollar budget, what high end gun should I get, I have had my eyes on either a new 05 speed and a cyborg, what are your opinons.

Please nothing smart parts, or Dye

BlackWeenie
10-12-2004, 09:49 PM
easy choice-timmy

ryanshep
10-12-2004, 09:50 PM
vik

oneworld
10-12-2004, 09:53 PM
i just got a new timmy!!...they are soo nice ..they rip..there light..there very efficiant..and are a all around good gun...

RTDynaflow
10-12-2004, 10:11 PM
You know, I must agree with ryan, vikings own. Not a lot of ups you can do to the 04s. I guess you could consider this a con... At the same time you don't NEED any ups.

jayloo
10-12-2004, 10:25 PM
Vike

afultz075
10-13-2004, 05:38 AM
I bought my 04 Viking with Razor Trigger and a Mitey Max for just under $1000 off of dbnpaintball.com. Best investment in ob i;ve made.

Kyser
10-13-2004, 07:24 AM
If I personally had the money I would probably look at the cyborg, the viking would be my next choice though.

Mosfet
10-13-2004, 07:37 AM
Viking
Shocker with HE bolt and new board.
Timmy
Angel '05 speed
Cyborg

You really ought to try them out if you can.
If you don't try them out first, its very likely you may end up with a marker that has something about the feel you don't like.
Then you end up going through 6 markers in 2 months like I did, regretting which ones you bought, and which ones you traded/sold away. :P

OmniM
10-13-2004, 08:15 AM
so no DM4 then?

Mosfet
10-13-2004, 08:28 AM
id say if you can find a good DM4 for under $1000 then go for it.
but watch out for those used markers.
I just picked up an HE bolt Shocker with clamping rise and wave trigger for $650, but every nook and cranny had some sort of paint/mud looking mixtures, and about every hex bolt had the hex hole stripped almost round. A little cleaning and part replacement, and its still a good marker, but people sell things with blown solenoids and stuff all the time.

Janixs
10-13-2004, 12:18 PM
AGD still has EMags. Or you could just get an RT Pro and save some $$.

68magOwner
10-13-2004, 04:37 PM
alias, but i did get to fondle an 05 speed, and a borg (didnt get to shoot the borg though :cry: ) the speed was definately as fast with no chops all day, but was hard to get to stop bouncing (even with debounce all the way up i think the owner couldnt eliminate all bounce) all 3 are nice markers, but if i had the choice, alias, no question about it.

Barfly
10-14-2004, 03:53 AM
that is bad if you have to turn debounce all the way up and still get bounce. I bought an '04 viking and when I got it, it was missing a microswitch pin and it would bounce almost every time I pulled the trigger on debounce of 1, but I fixed it, now I only get a little bounce when walking the trigger on debounce 1. I also have pandora board, no was. BTW if you want a timmy why not just make a pseudo timmy at a fraction of the cost, check link.

http://www.pbnation.com/showthread.php?s=&threadid=608457

go all the way to the bottom and you will see a cooler looking spyder than most timmies, that is if you are into that kind of gaudy crap.