Who installs Level 10?

[YZILLA]

I can not get my gun to fire for the life of me - Anyone know a a good shop to send this thing to have the level 10 installed properly - I tried different shims,springs,ect.. didnt leak anywhere but I pull the trigger and nothing happens . The gun just doesnt fire ? I am clueless. I am hoping for a shop that can do a fast turn around . Any ideas??? :confused:

By the way : this is a plain Automag RT ( not pro ) with a centerflag dynaflow 68/4500 tank and a recently installed intelliframe with blade trigger .

[B.A.M.]

hmm i have a similar problem that my marker wont fire but i think its just bolt stick. But ne way id send it to agd and have one of there techs fix it

[Tunaman]

send it here. I'll fix it. Email me. ;)

[B.A.M.]

hey if i cant fix my gun could i send it to you to

[Tunaman]

sure. ;)

[B.A.M.]

thx

[DR@GON]

LOL Good old Tunaman :hail: :hail: :hail: :hail: :hail: :hail: :hail: :hail: :hail:

[YZILLA]

I emailed ya !

[B.A.M.]

ya im going to try sanding the power tube cuz it looks like it a little big. if that doesnt work ill email you

[Titansu]

I can not get my gun to fire for the life of me - Anyone know a a good shop to send this thing to have the level 10 installed properly - I tried different shims,springs,ect.. didnt leak anywhere but I pull the trigger and nothing happens . The gun just doesnt fire ? I am clueless. I am hoping for a shop that can do a fast turn around . Any ideas??? :confused:

By the way : this is a plain Automag RT ( not pro ) with a centerflag dynaflow 68/4500 tank and a recently installed intelliframe with blade trigger .


Three things you'd want to try...

1.) Check carrier & o-ring - not too tight, not too loose. 1 - 1.5 is typical
2.) Check bolt spring - not too soft, not too stiff. - Medium or red spring
3.) Check input pressure - at least 850 psi.

[B.A.M.]

im having a tough time with my carrier. whats the easyiest way to take it out

[Titansu]

Dental pick...

Maybe a super small allen wrench - like 0.50 or 1/16"

[B.A.M.]

and then wat like pull it up

[Titansu]

yep.

[B.A.M.]

k thx alot man
hopefully that will work but if it doesnt ill just have to send it to
:hail: :hail: TUNAMAN :hail: :hail:

[B.A.M.]

well i put the new carrier in but ive run out of Nitro :cry: so now im going to have to wait to see if it'll work

[YZILLA]

I got it all working - I called paintballmaxx in houston and they gave me some help( I was gonna have them do the work for me ) . They told me to up the velocity on the back of the gun and it started firing - not very fast but it did fire. It leaked out the regulator piston, so I called AGD and they are sending me a new regulator piston .When I get this back together will I be able to rapidfire it like before I put the bolt in? I really was pumped when I got it to shoot so fast before the level 10 . Z-Man can I get this thing to fire fast with the leve 10?

[YZILLA]

Oh and I too ran out of air tinkering on this -lol

[BlackVCG]

Yeah, it'll shoot fast once you have a full tank of air and your velocity is up high enough.