PDA

View Full Version : Need a quick answer.......


Magz_rule
10-31-2004, 03:48 PM
Ok, heres the deal. Ive got 2 valves, 1 has a ULT on/off, the other has an emag on/off and pin. I need to put the ULT in the valve with the emag on/off and the emag on/off in the valve with the ULT. Question is, what EXACTLY do i need to switch? And how do i do so? Thanks, and any help would be appreciated. Thanks!
Magz_rule
10-31-2004, 04:59 PM
Anyone? Do i just switch the brass on/off piece and the pin? Or is there other things to switch?
VFX_Fenix
10-31-2004, 05:35 PM
The entire On/Off assy. The ULT comes with it's own pin which is a little different than an RT pin.
Magz_rule
10-31-2004, 08:41 PM
The whole on/off assembly is what? Thats what i need ;)
VFX_Fenix
10-31-2004, 09:22 PM
The ULT On/Off consists of two brass pieces that screw together, the shims that space the two brass pieces, several orings that are inside the brass pieces, and a pin that travels through the center of the two brass pieces.

This (http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=204&categoryID=16) is what the Stock On/Off looks like.
Magz_rule
10-31-2004, 09:34 PM
Ok, i took the ULT assembly out, and the emag assembly out. I can almost switch them, EXCEPT when i took the emag on/off assembly out, the o ring is stuck in there, how can i get it out?
Magz_rule
10-31-2004, 09:46 PM
Nevermind, got it out with an allen key and switched everything. Thanks for the help!!! :D