PDA

View Full Version : air leak coming out of the velocity adjuster....


brutus106
11-04-2004, 04:50 PM
its coming out of the velocity adjuster in the back of the gun/ valve (were you stick the allen wrench)

how do i fix it?
MindJob
11-04-2004, 08:06 PM
If you have the heavy spring in the LVL10, go down one.. if not

....replace the piston in the reg.
brutus106
11-04-2004, 11:29 PM
i have stock bolt and reg/valve, replace the piston? like buy a new one?
rb211
11-05-2004, 11:26 PM
What velocity are you shooting? If you crank the velocity adjuster down too far, it will vent air out the back like it is doing. Try backing it off a little. If that doesn't work, then yes, you will have to replace the piston.
gregmeyn
11-07-2004, 01:32 PM
im having the same problem it wont shoot over 220 with venting out the back of the marker. do i need to replace the piston and if so how much is that going to cost?
rb211
11-07-2004, 08:55 PM
I am assuming that you have a classic valve. If so, here is a link.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=30&categoryID=18

It costs $15 from AGD.

If you have a retro valve you will need this one.


http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=112&categoryID=23

That one is $20 from AGD.