Alias Timmy is chopping....fps goes down and paintballs collide in barrel!

[Cool fool!]

My timmy is chopping at first i thought it was the eyes....then i thought it was the barrel....then i watched the lpr gauge....it would recover in time for the next stream and it chopps....what should i do???

thanks yall texas ballers represent!! team decieved!!!


http://kat023.jpg my parents!!! :D

[LittlePaintballBoy]

Are you registered at www.IntimidatorOwners.com?

[68magOwner]

clean the torpedo

[tony3]

www.pbnation.com bob long forums will help you greatly.

[evo.end3R]

mine was chopping but i took it all apart cleaned evrytihng, the ramp, the lpr, hpr, lubed it all up and its working great now



what hopper are you using?? if your using a reloaderb/halo you NEED an adjustable ram cap. i can tell you how to set it up if you need to

[evo.end3R]

but definately clean your lpr, piston, and hpr for sure if you dont clean everything else.

[FSU_Paintball]

Clean and lube everything. Especially the reg and LPR. And make sure your LPR is set somewhere reasonable (around 80)

[Evil1]

I use a halo b w/ z code with my alias and I don't use an adjustable ram cap and I have never chopped yet. I've gotten barrel breaks, but no chops.

[teufelhunden]

I can only echo the advice of clean and relube everything.

[Glickman]

i will tell you the exact reason you are having this problem..........









Its cause you shoot a timmy :D

timmies are prone to this, just relube and replace the o-rings in the ram and tube

[indulgence]

if you do everything up there and it still doesnt work, and if you use a halo

check your detents. might be double feeding and thats how you get the balls colliding or going out at the same time.

[Eatem Alive]

if you do everything up there and it still doesnt work, and if you use a halo

check your detents. might be double feeding and thats how you get the balls colliding or going out at the same time.
had this problem last week. don't just check and see if the detents are there, take off the eye covers touch them and see if they are broke but not detached.

[Cool fool!]

nope my eye covers, eyes, detents....all fine. What else can i do? :confused:
BTW i lubed the lpr and the torpedo....

[-=Squid=-]

Sounds like bad dropoff to me...

Check the dwell.

[RenagadeOfFunk]

Did you mess with the dwell/settings?...

:nono: :nono: :nono: only us :ninja: can do that...