PDA

View Full Version : Mag Pressures, What can they run at?


Spencer
11-21-2004, 01:16 PM
What pressures can a mag run at?
Joni
11-21-2004, 01:48 PM
700 - 3000 psi
ChucktheMAGician
11-21-2004, 01:53 PM
3000! I was gonna put the limit at 1200!! They may be able to run at operating pressures that high but remember kids, leave the regulators on your HPA tanks!! A live paintballer is a happy paintballer :p
Spencer
11-21-2004, 02:42 PM
damn so there is no such thing as lowpressure with mags..
Rift
11-21-2004, 05:51 PM
nope
ChucktheMAGician
11-21-2004, 06:49 PM
The numbers we are listing are pressures going into the mag reg, on the back part of the valve. The valve itself operates lower of course, I was thinking it was between 600 and 400 psi but I can't remember for sure.
frischtr
11-21-2004, 10:58 PM
3000! I was gonna put the limit at 1200!! They may be able to run at operating pressures that high but remember kids, leave the regulators on your HPA tanks!! A live paintballer is a happy paintballer :p


Have you seen Z-man's videos where he runs a classic RT at 2200 PSI? Quite interesting... Check it out...
frop
11-22-2004, 02:15 AM
somewhere on here or AGD's site, it says the valve output pressure is usually 300-450psi.
space_weazel_45
11-22-2004, 06:58 AM
this sounds correct IIRC
this being the actual pressure on the bolt, excluding LVL 10. but the whole low pressure thing is kinda silly anyway.


somewhere on here or AGD's site, it says the valve output pressure is usually 300-450psi.
Dayspring
11-22-2004, 09:42 AM
Input- MINIMUM of 650psi, max of 3000psi.
Internal operating pressure- ~450psi
On-ball pressure- 65psi.