Weird E-Mag Prob

[AnArchist_1944]

after months of great service from my e-mag at yesterdays turrny it took a dump on me i noticed that when i tryed to shoot fast it would be like this

chuff bang cuff bang cuff bang

and my ROF was very low with ball breaks in the barrel and horrid accuracy so i took it into the cronny room took off the hopper and droped a ball into the breach pulled the trigger bolt hit the ball but couldent push it past the detent all the way pulled the trigger again and it shot the ball out.

now still with the hopper off and no paint in the breach I began to walk the trigger fast as a mofo

so i took off my grip on the left side and noticed some chewed up clear o-rin peice wraped around my noid plunger so i pulled it out put my grip back on shot it it was a little better but the problem was still there so i backed out my ball detent a bit and it worked fine but was double feeding and breaking paint in the breach.

now i had a full tank and a full batt charge gun was wroking without a hitch 48 hours previous and i was useing an Angel Ball detent that i was useing for months without a problem any help would be appreciated

oh and my gun setup says black karta but iam still waiting for it in the mail so iam useing a blue ULE.

[xballfan780]

Is this the chewd up tingy?
http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=173&categoryID=24

You have lx right? It needs tuning ;)

[AnArchist_1944]

I have LX but it was working 48 hours previous with no probs and that chewed up thing I couldent tell if it looked like that it kinda looked like a very used bumper o-ring is that peice on the AGD store made of a rubber like a bumper o-ring because thats kinda what that chewed up thing felt like.

[xballfan780]

is it the valve bumper?

[AnArchist_1944]

I was thinking it might be the bolt bumper but then i thought how could it have gotten all the way down to my noid

[xballfan780]

well is there a bumber on the valve?

[AnArchist_1944]

yeah :tard:

[xballfan780]

sorry if I sounded like a jerk , but you never know ;) it could happen

hmm, Is the thing metal or ruber ish?

look on adg store and see if you see it

[AnArchist_1944]

it was in distinguishable it was so chewed up it looked like peice of a bolt bumper tho.

[xballfan780]

could be , so whats wrong with the emag is chuffs? adjust the lx , and oild the valve

[White_Noise]

lube the marker, possibly adjust lvl10, but if youre using a on/off asa and a screw in tank, make sure that the on/off isnt screwed in too far, as this will cause the tank valve to become partially closed, not giving you enough air to fire, which could cause your chuff problem.

[AnArchist_1944]

its oiled and the LX is working good maby to good because it just cant get a ball past the Ball Detent it hits the ball half way and chuffs then when another shot is shot it fires the ball the rest of the way out

[xballfan780]

add or take out a shim ;)