Duzzy E-mag is done! (for now...)

[Duzzy]

This isn’t exactly a new E-mag but I have never used it yet. I was waiting until all of my fun parts got in. I am still waiting on an Endo Cradle but I got tired of waiting. So I will post pictures now and play with it ASAP.

The Duzzy E-mag
-Red WL ULE Body
-Red CF ULE Body
-10 inch CP 2 piece barrel
-RPG Snatch Grip
-Rail ULE’d by BlackVCG
-NW On/Off
-NW 4 inch Drop
-2x NW Quick Disconnects (for drops not hose)
-AGD Warp Feed
-VL Egg2
-Custom “Duzzy” Grips by Heather
-Intellifed connection to the Warp
*EDIT -It is also milled to accept BOTH WL and WR ULE bodies

It takes me about 6 minutes to change it over from a warp configuration to a vertical feed configuration. It could be done faster but I don’t want to scratch it by hurrying. Some pictures do not show the cool grips, but I was lazy and didn’t want to switch bodies at the time.

Here is a picture of the grips, the picture quality is lacking because there are only so many places in a dorm to take pictures.
<a href="http://www.jayloo.com/files/pics/14000/Picture_006_1434_rs.jpg"><img src="http://www.jayloo.com/files/pics/14000/Picture_006_1434_rs.jpg" width="600" height="450"></img></a>

These are assorted pictures of the gun itself, it is hard to see the grips but I tried to get a good angle on them. The pictures are not that good, but I am near a bathroom so I cannot have the gun above window level where the light is. Also it is hard to get far enough away to focus when you have no room. That being said, enjoy.
<a href="http://www.jayloo.com/files/pics/14000/Picture_019_3758_rs.jpg"><img src="http://www.jayloo.com/files/pics/14000/Picture_019_3758_rs.jpg" width="600" height="450"></img></a>
<a href=" http://www.jayloo.com/files/pics/14000/Picture_003_3310_rs.jpg"><img src=" http://www.jayloo.com/files/pics/14000/Picture_003_3310_rs.jpg" width="600" height="450"></img></a>
<a href=" http://www.jayloo.com/files/pics/14000/Picture_011_9674_rs.jpg"><img src=" http://www.jayloo.com/files/pics/14000/Picture_011_9674_rs.jpg" width="600" height="450"></img></a>
<a href=" http://www.jayloo.com/files/pics/14000/Picture_013_1863_rs.jpg"><img src=" http://www.jayloo.com/files/pics/14000/Picture_013_1863_rs.jpg" width="600" height="450"></img></a>
<a href=" http://www.jayloo.com/files/pics/14000/Picture_014_6870_rs.jpg"><img src=" http://www.jayloo.com/files/pics/14000/Picture_014_6870_rs.jpg" width="600" height="450"></img></a>


If I misrepresented anyone please notify me and I will correct it, but I have class in a couple of minutes so I am in a hurry.


Disclaimer: I tried everything possible to comply with the college’s regulations regarding paintball markers, however, I do not approve of their treatment of my equipment and they have stopped responding to my requests for change.

[thelane]

i like it the colors r cool and du u like the warp ar CF better?yay 50th post!! :clap: yay 1st response :clap: :clap:


:shooting: :dance:
-lane the flying skwril

[JoshK]

neat...but the whole college thing? what they do?

[White_Noise]

nice emag. i hear you on the regulations regarding paintball markers on the college campus. i had the same problem trying to find a good place to take pics here as well. oh well...my theory is that if other people dont know i have paintball stuff here, then there is no problems.

[frop]

Nice gun man! ^^ Yup, I don't even talk about paintball anymore. Damn near lost all my gear once, if they try again, well, I'll just say that iwon't be going here anymore.

[tony3]

Nice grips, not diggin' the 10incher though.

[Duzzy]

To the two comments, I hate hoppers without my warp, I have played with it so much (on my RTP) that I constantly forget I have a hopper and get shot there. I even use a Rikochet and I still get out from hopper hits. I like 10 inch barrels because it is easier for me to move around and stay tight. I do not like 2 peice ones though, this is just in case I ever decide to get a longer tip... Thanks for the compliments and on to the main event.

The College situation is thus...

No projectile weapons of any kind are allowed on campus unless they are registered with a supervisor and kept in the "gun safe". The guns can then be checked in and out as long as they are immediately taken off campus.

Here are the problems...

1. The gun safe is closed on weekends.

This makes it useless for almost everyone who decided to be responsible and check it in. I cannot paintball on weekdays, mainly because the field is closed but I don't have time either. I have college and work.

2. The only alternative to the gun safe is a place off campus.

The local store won't do it any more because people kept accussing the owner of scratching their gear. How true this is I don't know. You can keep it in your car as long as it is off campus, many people don't have cars so that doesn't really help. Also this is Montana weather and I am under no circumstances leaving my guns out in -30 degree weather. Replacing seals is expensive. I am not sure that they would get ruined but I don't really think it would help, especially if they dry out and crack. Also keeping my guns (5) in my car not only creates a nice target for theft.

3. An appointment (usually a week in advance if you actually want to get them) is needed and the supervisor (has the only key) is also responsible for about 4 other jobs and subsequently is never there.

The problem here should be obvious so I won't state it.

I have emailed them repeatedly, asked if security could get a copy of the key but they don't want to. Apparently having kids keeping guns in their rooms so that they can actually use them is preferable to the bother of checking them in and out 2 days a week. They have stopped replying to my queries, and so I am doing this as a last resort. I haven't paintballed once in the semester I have been here and it is stupid. End of my rant, enjoy my baby.

[jamescell]

that is one sweet looking gat!

[DiSoRdeR]

What is the picture on the grips? and I have always been a big fan of Emags :headbang:

[Duzzy]

It is a duck with flames shooting out from the back.