What mods can i do

[Roastem50]

Hey guys i still dont understand how to tell what gun i have exactly and what these mods are or do. my gun has a silver piece on the end that says it is a 68 auto mag, it has an expansion tank, and a double trigger, it also has the piece that you turn to stop ball flow from teh hopper. I think the real thing i don tunderstand is when i am looking at the parts places, i dont know what parts are comnpatible with my gun. such as in th eonline store.....
there is listed TAC ONE
RT ULE
Sydarm
E-Mag !!
Upgrades etc...
but when i am looking for say a new main body i don tsee automag listed or am i just looking for the wrong stuff, parts, or place....
I woudl liek to find a price on a N@ tank, but i dont even see any tanks listed....
I dunno maybe i am just clueless....
any help?

[Muzikman]

It sounds like what you have is a Classic Automag with a Powerfeed body (maybe even a Minimag).

This means anything that will fit a classic will work. Here is a list.

ULE Body (Vert feed or Warp) (You will need a new barrel as this takes cocker threaded barrels)

Tac-On Body (You will need a new barrel as this takes cocker threaded barrels)

Level 10

X-Vavle (this will replace your entire stainless steel classic valve with an aluminum RT valve. This also comes with Level 10)

ULT (ULE Trigger) - ***Though, it's not recomended for the classic valve, some people have been able to get it to work.

Intelliframe (it is NOT an electo frame, it is just a quality dbl finger frame)

Y-Grip

As for tanks, AGD only sells the things they make, and they no longer make HPA (N2) systems. Your best bet is to try another online store for the tank.

[Roastem50]

Thanks for the help.....
but what advantages are there for switching the main body? and can the warp feed be adapted to work on the classic?

[Rift]

the ULE body is much lighter then the older SS ones, a for the warp yes you can mod it to fit the powerfeedbody you take out that plug and stick it on the top and plug the warp hose from the bottom. What you can also do to the top is shorten it by cutting of the top so you have a lower profile.

[Little_Ho]

Hi there
sounds like that you have a classic Autommag or Minimag.
Look what i did. All what you need is maybe a longer Plug for the Feedneck.

Look this here.

<a href="http://mitglied.lycos.de/pezipezi/America/Paintball/Marker/Automag%20after%20Upgrade/AM%20WF%2016%20and%2012inch%20right1.JPG"><img src="http://mitglied.lycos.de/pezipezi/America/Paintball/Marker/Automag%20after%20Upgrade/AM%20WF%2016%20and%2012inch%20right1.JPG" width="600" height="450"></img></a>

See ya

Little_Ho

[DiSoRdeR]

The silver piece sticking out the back is the valve. If theres a part that you want just ask and we will tell you if it will work or not. Can you get a picture of your gun? Oh, And Welcome To AO :cheers:

[Roastem50]

I believe that is the same gun i have minus the upgrades of course. what is the piece the airbottle is on that dropds down? i woudl liek to do that so i can have the bottle farther forward.... and what is that body called that has the feed from the bottom? unfortunatley i cannot get a pic right now as i lost the cable for the camera to the computer....

[Titansu]

What mods can i do

Most of them are guys.... but I heard Load SM5 swings both ways :dance:


Sorry Jeff.. the door was opened and I had to walk in. :rofl:

[Autosnipe]

Most of them are guys.... but I heard Load SM5 swings both ways :dance:


Sorry Jeff.. the door was opened and I had to walk in. :rofl:

haha, good catch!!

[Little_Ho]

Hi Roastem50,

it is an Category5 Adjustable Drop forward. The body is an left feed Automagbody. But this one is exchanged to an Warpfeed body :D .

Well all i did was useing a longer Plug and hooked up the Warp hose to the bottom. If you get a right feed Body you dont have to route the Hose under the Gun like i did.

More question pm or mail me. Want to see more pics go here (http://mitglied.lycos.de/pezipezi/America/Paintball/Marker/)


See ya

Little_Ho