Bust out your measuring tape!!

[Skoad]

Ok guys, i've been putting off this mag project for a while and i finally took the first step in making it.

Now before i start spending lots of money I want to see if this is actually possible...thats where you all come in!

I need measurements of various mag/agd components to see if they will work with this project...


These are the measurements I need. 3 dimensions will be needed L,H,W....

Classic rail
Some powerfeed body with valve inserted (just body part,don't worry about feedneck, and mention what body it is)
Warpfeed
4 or 3.5 oz co2 tank (diameter and height)

[WenULiVeUdiE]

9 13/16' long
1 1/4 high
1 1/4 wide

SS emag valve and body, p/f right

[Skoad]

thanks, thats one down!

[LittlePaintballBoy]

Warp:

5 1/8" long
4 3/4" Tall (Bottom of battery door to top of warp)
1 5/8" wide

4 oz CO2 tank

6 1/2" diameter
About 6" from bottom to top of reg (when standing)

[Skoad]

for a 4oz co2 tank? that seems a little large..

ps thanks for the warp measurements!

[LittlePaintballBoy]

Im almost positive this is a 4 ounce, it definately isn't a 9 ounce. About half the size.

[p8ntball365]

I can do the classic rail
length= 8"
Width= 1 1/8"
Height=~5/8"

height is a rough measurement because it goes at a / angle near the bottom. But I'm confident thats pretty close.

[Skoad]

well ifound the measurements of a 3.5 oz tank (which is probably more suitable than a 4) and it is 2inch diameter

[Skoad]

I can do the classic rail
length= 8"
Width= 1 1/8"
Height=~5/8"

height is a rough measurement because it goes at a / angle near the bottom. But I'm confident thats pretty close.


thanks, yea i know the thing your talking about. That'll work! thanks

[p8ntball365]

no problem at all. and do we get to see a preview of the project?

[Skoad]

as soon as the parts roll in and i think that this is actually possible :P

[FSU_Paintball]

8" long
5" circumference







Wait, what are we talking about?

[LittlePaintballBoy]

well ifound the measurements of a 3.5 oz tank (which is probably more suitable than a 4) and it is 2inch diameter


The CO2 tank I have is sort, is the 3.5 OZ one a little longer?

EDIT: I'm an idiot, I mean't circumfurence.