PDA

View Full Version : >>>>>>>Need Advice<<<<<<<<


Rexel16
11-08-2001, 05:10 PM
I have a minimag with a benchmark 2x frame. Now, should i get an Elcd, Retro valve, Elcd & Retrovalve, Intelliframe, or should i just keep the benchmark? Whats the best possible setup i can have for shooting fast?

Thanks
MINIRETROMARK
11-08-2001, 05:17 PM
keep the benchmark and buy a retro. and for the elcd like the boo yaah it is not compatible with the retro, but in the other hand the hyperframe should be fine.
Rexel16
11-08-2001, 05:20 PM
would a booyah or mako work well with the stock minimag valve?
MINIRETROMARK
11-08-2001, 05:25 PM
yes with the stock valve it should be fine:)
Rexel16
11-08-2001, 05:27 PM
Will I have a problem with shootdown with the stock valve and an elcd? Would the stock valve and elcd be better than a Retrovalve w/ Benchy or vice versa?
MINIRETROMARK
11-08-2001, 05:33 PM
have you looked up the hyperframe, that elcd frame is compatible with the retro.
MINIRETROMARK
11-08-2001, 05:44 PM
Rexel16

with the stock valve you usually suffer shootdowns if you go over 10 pbs
Fritzy
11-08-2001, 09:11 PM
My friend has a hyperframe and a standard AIR valve. Set at 13 bps he doesn't have any shootdown. In fact, one of the HALO videos shows a standard mag witha Hyperframe shooting 16 bps with no troubles. If you are looking to shoot fast without short-stroking an electronic frame is the way to go. However, a retrovalve will generally be more reliable and can shoot pretty quick itself.

If speed is your primary concern, get the electro-frame.