Slowest E-mag in all the land

[dyerules]

My friend just bought a used e-mag. It has 3.2 software, emax valve, ule, etc. At first the sear was dragging on one of the notches in the rail.The sear would catch and the gun wouldn't even fire. We sanded it down so that it will now reset and fire but it is INCREDIBLY slow. It seems like the marker isn't recording all the shots and shooting uber slow. Ex: pull it 8 times/sec and it shoots twice. What do we do. :dance:

[MonsterMag]

leaking?
chuffing?
niod clicking?
What mode are you using?
How old is it?
got the right on/off in the valve?

[dyerules]

leaking-no
chuffing-no
noid clicking-we cant get it to click w/ no air
mode-e-mode
age- not sure, kinda new, has a e-max valve. came w/ 200 shots.
on/off- no idea

[MindJob]

Sounds like the magnet in the trigger is too close to the hall effect swtich. Back it out a little. On the display, cycle unti you get to the trigger test. TRIGGER ON/OFF. Pull the trigger and adjust the magnet until it reliably says "ON" at the back of the travel. For more and better info, checkout Havok's site www.havoc-online.com.

[MonsterMag]

when you boot it up does it sat agd 3.2?
or does it like glitch? If its glitching , you need to move the trigger magnet out a lil bit

[BeaverEater]

Gotta start with the basics: Is the battery fully charged and are the terminals touching. Does it go one and what is displayed?

[Andrew Cunje]

what is the tank pressure output....thats always one to check...and i beleive that the sears arent really meant to be tinkered with 2 much.... is it nice and greasy....mags love to drink my oil :)

[AGDlover]

shut up and send it to tuna then it'll be the fastest emag in all the land

[MonsterMag]

shut up and send it to tuna then it'll be the fastest emag in all the land
correction , it will be as fast as every tuna tuned emag ;)

Yeah send it to tuna, he will fix it up

[dyerules]

Thanks for all the help. We actually found that the sear was dragging on one of the protruding notches in the rail causing the marker to cycle super slow or not at all. We sanded the rail and now it rips.

[bunker17]

Just wondering if i replace and emag valve for and xvalve do i have to change the on/off for the emag or the x valve one works fine ???

[Rift]

yes you have to switch the on/off to the emag one