Switch for hyperframe?

[JoshK]

Hey...i have a stock hyperframe and the trigger is very heavy for a electro, would a new switch fix this? What kind would you suggest? How much are they? Were can i get them?

Thanks ahead of time...Josh

[Chronobreak]

uhm nereobro used to sell em but he doesnt anymore

radio shack or soem electronic/hardware stores have em.

dono what the stock switch is 25g or 50g ? dono but i would probly go lighter unles its a 25 then maybe heavier... :confused:

think theri 50 stock though

[personman]

Wrong.
The stock switch is 250g and you cant buy lighter ones at radio shack.
You can try modifying your switch

http://www.automags.org/forums/showthread.php?s=&threadid=37414&highlight=hyperframe+trigger+job

but next time do a search.

[B.A.M.]

How much do this hyper frames cost.?? :confused:

[Chronobreak]

How much do this hyper frames cost.?? :confused:

$200+ theyr dicontinued so ebay or misc section

radio shack doesnt carry them? unles they stopped they had them a while back when i checked...

billa your sig is way too big :rolleyes:

[personman]

The stock switch is 250g and you cant buy lighter ones at radio shack.
.

[MarkM]

billa your sig is way too big :rolleyes:

No it isn't ;)

[B.A.M.]

No it isn't ;)
Thx

[Chronobreak]

bah stupid mods. mine was like 301 and tato removed it and bivkered at me :(

unles they cahnged i thoguht it was 300 x 175 MAX and 20k

[MarkM]

bah stupid mods. mine was like 301 and tato removed it and bivkered at me :(

unles they cahnged i thoguht it was 300 x 175 MAX and 20k

If want to come to the party and do some am moderation at least come armed with the correct tools and information ....

• Sig images may NOT be larger than 350 x 175 pixels. ANY image found taller than 175px or longer than 350px will be removed. Images must be under 20k. These are guidelines and it is recommend that your sig images be smaller than the maximum allowed numbers. Under 15K is prefered, and the smaller the image the better.


Billabongboy13j's sig is 18420k in file size and 309 x 164

If you want to brush up on your obviously needed revision then look here

http://www.automags.org/forums/showthread.php?t=72174 and if you feel so strongly next time use the report post button it is the little red triangle to the top right of every post don't clutter up threads with pointless accusations

(threadjack over ;))

[crackerjack]

You can get a light switch from Ga devil pm him. Or you can buy a switch from Radio Shack remove the lever and bend the tab that holds the spring which will lighten it.