View Full Version : Emag won't startup
cannibalpope
01-04-2005, 12:23 PM
I just bought an emag the other day.
After charging the battery for 4 hours, I turn the marker on and the lcd just flashes a few random letters and shuts off. None of the buttons seem to respond.
What could be causing this problem?
AnArchist_1944
01-04-2005, 01:47 PM
ur trigger magnet seems to be to close to your Hall Sensor put your finger behind the trigger a bit and then turn it on if it still does that then back out your trigger magnet a bit.
athomas
01-04-2005, 06:48 PM
Yes, back the trigger magnet out towards the front of the trigger. That should cure your problem.
Timo276
01-05-2005, 10:22 AM
i have the same problem...i tried backing the magnet out as far as it oges, but it still does it. any other suggestions?? thanks
Titansu
01-05-2005, 11:21 AM
Your battery may be shot. If you can, rig up a 9V to it to see if the boot screen pops up. Put the + lead on the screw connected to the red lead and the - on screw connected to the frame.
You only need 9V to see if the boot menu, but 18V to activate the solenoid.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.