View Full Version : Ult w/ emag
B.A.M.
01-09-2005, 04:30 PM
Does a ult on an x valve work with e mag lowers. Also do you need the emag rail and sear to go with my rt ule or no? thx
xballfan780
01-09-2005, 04:32 PM
The ult will work on emag , but slows down recharge rate and makes the gun shoot slower. When you get an x valve you have to use and emag on/of assembley
B.A.M.
01-09-2005, 04:43 PM
k
can i just use my rail or will i have to use an emag one.
xballfan780
01-09-2005, 04:46 PM
yours will work
B.A.M.
01-09-2005, 04:59 PM
but would'nt you still need the sear an what about the wires i always see on the e'mag rail?
xballfan780
01-09-2005, 05:13 PM
but would'nt you still need the sear an what about the wires i always see on the e'mag rail?
all the wires are on the emag frame , the sear comes of the rail with a anxel pin
B.A.M.
01-09-2005, 05:16 PM
k got it
TMAXXKING1
01-09-2005, 05:34 PM
good luck i know that vid will help you out alot .. alot of real good info on it ... :headbang: :headbang:
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.