Thunder Bunny
01-09-2005, 06:13 PM
My brother liked my rt valved Mag so much he is about to make a trade for one, the only thing is we cannot get it to bounce. I have my output set to about 900psi, and mine bounces nicely.
I checked Zak Vetter's site, looked at the spcs thread here, and haven't found much to help me. I'm thinking that I either need more output pressure or there is a problem with the valve. I mic'ed the on/off pin and it measures about 0.740. I don't know if that's enough to make a difference, but something else I noticed is that when you pull the trigger all the way back and it fires, then as you slowly release it you can see the bolt come forward (though the hole in the powerfeed) then you let it come forward a little more and it makes a little psst sound and the trigger gets soft. I kinda think I should pull out the sear and file a little off the part that pushes on the on/off.
What do ya think? Anything I should try, besides more output pressure?
I checked Zak Vetter's site, looked at the spcs thread here, and haven't found much to help me. I'm thinking that I either need more output pressure or there is a problem with the valve. I mic'ed the on/off pin and it measures about 0.740. I don't know if that's enough to make a difference, but something else I noticed is that when you pull the trigger all the way back and it fires, then as you slowly release it you can see the bolt come forward (though the hole in the powerfeed) then you let it come forward a little more and it makes a little psst sound and the trigger gets soft. I kinda think I should pull out the sear and file a little off the part that pushes on the on/off.
What do ya think? Anything I should try, besides more output pressure?