new to mags

[10-brink]

I was told by the person that I bought my mag from that I need to read some stuff on shims or something? I cant find it

[kylemc]

all the problems with a lvl 10 which i just assumed you were talking about cause of the shims but the ult's also have shims
http://www.automags.org/forums/showthread.php?t=43538

[10-brink]

please people I need some help

[REDRT]

Does your gun have problems? or do you just want to learn about it?

[robb2269]

there not problems once you set it correctly. My advise don't try to tune the level X and the ult at the same time. Tune the Level X then a ult if you have. every couple thousand shots or so you might need re-tune. Not a problem after the level X breaks in I had to go up half a carrier size not a big deal. Then the Level X is back working again. I have not had to touch it again since my last adjustment. Lots of sticky's and help here and with the CD rom. Good luck.

[10-brink]

REDRT, both

robb2269, I would tune my lvl 10, but I dont know how!!!

[space_weazel_45]

Hows about telling us what the gun is doing that you don't like and we can start there.

[REDRT]

He is the level 10 video.

http://www.automags.org/~Miscue/level10.mpeg

[10-brink]

I have an rt ule, and it goes pffffffffffffff when I pull the trigger

[Aleis]

Soiunds like a Lvl X problem

try upping the velocity a lot first,

Then read teh instructions on how to set it,

Online directions (http://www.automags.org/resource/level10/index.shtml)

[robb2269]

if its going puff it sounds like your volicity might be low turn it up until you hear the marker set or click then turn alittle more. When you go some where there is a chrono ceck it and I found mine works best around 270-275psi. To if that dont work try moving down 1/2 carrier size in the level X. and keep going down until it sets or you get alot of air going down barrel ten go back up a 1/2 carrier and fine tune with shims. takes time but once you set it will be good or along time. watch the video posted above if still have prolem call AGD tech line.

[10-brink]

thanks aleis, thats what I was looking for