ProjectMag
11-12-2001, 11:58 PM
Well I got a chance to use the plastic nubbins this weekend and was pretty satisfied with them. I only had a couple ball breaks out of about 1500 rounds but don't know if it was from the type of paint I was using(Brand X, not the best) or the nubbin itself. I use a Boomstick and the tab on the back of the nubbin didn't seem to cause any problems or resist the flexing of it. I read that Gunga here on the boards had some problems with wear, however, after inspection of mine, I could not see any wear whatsoever. I can say that these plastic nubbins are an improvement over the wire ones, being that last time I played I broke a P nubbin and couldn't figure out why I was chopping so much. :D Also, thickness of the plastic ones doesn't seem to be an issue in my case. My barrel goes in and out as smooth as it did with wire nubbins, no hang ups.
*Edit* I have the short nose bolt which may be why I see no wear on the nubbins
*Edit* I have the short nose bolt which may be why I see no wear on the nubbins