PDA

View Full Version : XMag - Modes



Beauty
01-27-2005, 11:07 PM
When I put it in E mode it's fine, but for some reason M mode seems like it full auto at times, not sure what's going on with that. Can someone explain what might be the problem. It seems faster in Manual than electro.

Dayspring
01-27-2005, 11:09 PM
What you're in is hybrid.

You have the electronics on and the switch to manual. It's using the RT kick of the valve and the short electro pull of the emag. So yes, it's very fast and possibly illegal.

dj89
01-27-2005, 11:10 PM
What you're in is hybrid.

You have the electronics on and the switch to manual. It's using the RT kick of the valve and the short electro pull of the emag. So yes, it's very fast and possibly illegal.
Yep

Beauty
01-27-2005, 11:17 PM
Nope, I turn the electronics off and turn the dial to manual and it fires full auto. What else could it be?

dj89
01-27-2005, 11:27 PM
Ok when you pull the trigger in all the way and don't let it go back out dose it still go full auto?

REDRT
01-27-2005, 11:31 PM
What is your imput pressure? I have mine set at 1000psi on the Emag and mechanical just rocks! Much fast than E or hybrid mode. Yes, the refs go nuts if I use mech in a game like that... :D

Beauty
01-27-2005, 11:38 PM
Of course it seem to be working fine now. We put AutoLube in the air hose that goes to the valve and it seems to be shooting fine in Manual and Electro. I guess the lube help, because it was also leaking a bit in Manual mode. Thanks for the help.

We have the stock barrel and the 16in stiffie. What is the difference or which one is better or does it depend on what your playing?

dj89
01-27-2005, 11:40 PM
It depend on what your playing
;)

Beauty
01-27-2005, 11:41 PM
How do we find out what the imput pressure is? Is it on the tank somewhere? We purchased all of our tanks used.

dj89
01-27-2005, 11:44 PM
What kinds do you have?

REDRT
01-27-2005, 11:58 PM
Adj tank or pre set? One gauge or two?