PDA

View Full Version : Intelliframe and Richochet hopper, can they be intellifed?


MajorDamage
11-13-2001, 04:54 PM
Can you hook the Intelliframe up to a Richochet hoppper???

ENDO!
speedballbanks
11-13-2001, 05:02 PM
probably you are only hooking it up to the servo
Blade
11-13-2001, 05:34 PM
how would u do it
deded
11-13-2001, 07:17 PM
I don't have a ricochet, but I'd say its probably a lot like the Revvy intellifeed at

http://www.airgun.com/manual.html

I am pretty sure that the Intellifeed link hooks up to the revvy on the wire that carries the electrical signal from the sensor.

There is most likely a wire like this in a ricochet, but as I do not have one, I am not sure where this wire is or what it would look like.

Take a look at the inside of your Ricochet and see if it looks like the pictures at the above link of the Revvy, but I wouldn't make any permanent cuts if you don't really know which wire is which.

Maybe someone with a Ricochet and some electrical knowledge could post how they have done it (if anyone has)
Omicron
11-13-2001, 09:02 PM
i thought the ricochet spins with each ball fired anyways????
tooslow
11-13-2001, 09:08 PM
it does.
PigSweat
11-13-2001, 09:14 PM
Yeah, there's no need to Intellifeed a Riccochet, as they have a small 'switch' that trips the servo with every ball fired. I've had mine apart, and it can be done, but why?
PsychoMag
11-13-2001, 09:46 PM
What the....who the....a ricochet is a sweet hopper. No need for a link. The link was designed for the revvie.

lol...the nerve...:)
MajorDamage
11-13-2001, 11:43 PM
Would it still spin with each ball fired if it was say, on a warpfeed? I don't have one so I don't know, I was asking for a friend though.

ENDO!
tooslow
11-13-2001, 11:55 PM
Yup, it sure will. There's a little flappy thingie in the neck of the loader that gets "hit" by paintballs as they pass by it. So, every time you fire a ball, another ball drops past the trigger and the agitator spins.
Temo Vryce
11-14-2001, 07:13 AM
You don't need to Intellifeed the Rico. Like it was said earlier they have a switch in the feed neck. But if your friend has the I-frame I would suggest getting the warp and connecting it to the I-frame. I hope this help to answer your friends question.
MajorDamage
11-14-2001, 02:10 PM
Ok thanx guys. AO RULES :D!

ENDO!