PDA

View Full Version : xvalve


nipplez
02-22-2005, 12:34 AM
just got the xvalve, should i oil it before its first use?
dsrkd
02-22-2005, 02:01 AM
Yes.
Use K-C if you can. Best oil that I have found.
nipplez
02-22-2005, 01:42 PM
just put a couple of drops in the asa and dry fire right?
undescriptive
02-22-2005, 01:52 PM
yup, make sure you don't have the barrel on though - it will get oily....

I usually pull out the on/off and oil that too and pop a couple of drops down the powertube as well (to make sure it all well oiled) the fire 20-50 shots

and let it break in a little!
nipplez
02-22-2005, 02:55 PM
thx alot guys, love this forum. lots of helpful ppl
nipplez
02-23-2005, 01:45 AM
do you guys put any oil on the bolt stem if thats what its called... the thing the bolt slides back and forth on.
undescriptive
02-23-2005, 03:01 AM
I do..

usually a couple of drops - it helps the PT O-ring a bit and prevents bolt stick
brain.68
03-01-2005, 06:42 PM
i got a huge problem. i have an rt pro with all the ule ups and the x valve. the is problem just happened with out warning so here it is.

one day i went to gas up my mag and i started firiing and i mean like automatic at maybe 17bps and the only way do stop it was to degas the gun. so my local store operator took the valve apart and oiled up lots of stuff and its still doing it so im gona send it in but i was wondering if u could help b4 i send it.
nipplez
03-01-2005, 06:50 PM
It could be your trigger or sear? it might be stuck after the first pull and it keeps on firing. id check that because i dont think the valve can fire by itself. hope that sheds some light for you
fred1
03-01-2005, 07:06 PM
brain.68 do you have a ULT?

mine did that with ULT it needed more shims.
brain.68
03-01-2005, 07:25 PM
well i just took it out back and it was doing the full auto thing a gain and i was pulling the trigger and then i got it to stop. So i started putting one ball in at a time and it would shoot once. or even a few times in a row (when i pulled the trigger) but it seems like the sear didnt catch . cause i just pushed on the lv 10 and it would click into place and the it would shoot correctly untill i had to push on it again.
brain.68
03-01-2005, 07:28 PM
the pressure in my tank was down to 1000 psi when it stopped the auto thing
brain.68
03-01-2005, 07:42 PM
post away but i gota go to work ill be home in 3 hrs
nipplez
03-04-2005, 02:09 PM
should i lube it before i attempt to tune it? if so should i put some in the inlet, powertube and on/off?