PDA

View Full Version : velocity problem



cdacda13
03-04-2005, 11:59 PM
my 68 classic with level 10 is shooting at insane FPS. It was at 380 FPS and it was the lowest velocity i could get before it wood not work.. BTW I have the red spring it

11_Mile_TMaster
03-05-2005, 01:15 AM
my 68 classic with level 10 is shooting at insane FPS. It was at 380 FPS and it was the levelest velocity i could get. BTW I have the red spring it
Try a different spring... either lighter or heavier. You might also want to try stepping up a carrier size (You will likely have to replace the carrier o-ring as well)

athomas
03-05-2005, 12:37 PM
Do you mean you can't turn it down? Or do you mean it stops firing if you turn the velocity below that value?

If it doesn't go lower when you adjust it down, then the problem is a bad regulator seat o-ring. If it stops shooting when you turn the velocity down below that value, then you need to use a shorter bolt spring.

cartman11590
03-06-2005, 12:08 AM
wht spring are u using?

cdacda13
03-06-2005, 01:10 PM
the red spring