New-Emag Panels without inserts

[luke]

In Stock>

Powder Coated $32
Blue, Black or Red
One example>
http://www.lukescustoms.com/Page16_Emag/AE-70.JPG

*Raw Panels $30
Example>
http://www.lukescustoms.com/Page16_Emag/AE-71.JPG

*Two Tone Powder Coated $35
One example>
http://www.lukescustoms.com/Page16_Emag/AE-76.JPG

Plastic molded Emag panels $21
One example>
http://www.lukescustoms.com/Page16_Emag/PE55.JPG

Click Here (http://www.lukescustoms.com/page0016.htm) for more options and current inventory.

(updated 1-10-08)

[Maggot6]

Any chance you could Mill / cut out those lines further apart? Then I might consider buying one. If not, well, I still might buy a pair. Good luck selling.

[luke]

What you see is what you get. These are completed ready to ship. ;)

[maglover728]

do you make anything like this for standard 45 grip frames?

[luke]

You mean with out inserts?

[Sk8ermog]

looking great as always Luke. Might just have to buy an emag just to put these grips on them. Oh and I had some local friends interested in your 45 grips w/o inserts also so.... if you end up making a batch of 45 pannels with nice deep milling then I'll take some for my team. thanks.

[luke]

They would rather have deep milling in the front rather than ULE milling in the back?

[Sk8ermog]

oh... good point. Well if the ULE milling really makes a difference then yes, but grips don't weigh much so we were going for the outer look more then the over all weight. But if milling the back out of them makes them lighter then I know I'd rather have that then grooves on the front.

[luke]

If I have materials in stock I'll do a small run this week. :)

[p8ntball365]

oh figures, after i ask if you have them without inserts, and buy a pair with, you make em without. jk

[luke]

I don't recall, but maybe I made them because you did ask. ;)

[p8ntball365]

yep
are these plastic or metal? and is there a way you can do panels, w/ no inserts or the divit for inserts, so its just flat?

[luke]

:) People have made requests for the past year; I wasn't going to do any until my inventory of panels w/ inserts got low. ;)

[p8ntball365]

sounds like a good hit, good luck w/ sales

[luke]

Thanks :)

[Phantom_Mag]

ill take a pair if i can get a pic i cant see these, but ive been looking for a nice pair of after market panels. email me a pic possibly im interested. also looking for just clear panels

[luke]

ill take a pair if i can get a pic i cant see these, but ive been looking for a nice pair of after market panels. email me a pic possibly im interested. also looking for just clear panels


Strange, you are the second one to say you can't see the pictures, they are there. (?)

[luke]

up for sk8ter.

[Sk8ermog]

lol for me? Ah you shouldn't have. lol

I think for the price and look the pannels with the inserts will work better for me. I'll pm you.

[A-Tach-One]

Do you find a big difference in wieght between these and your insert version? Thanks

[luke]

It's not allot, I think these are like 1.5 oz. lighter (per set), I would have to re-weigh them to be sure...

[Emert426]

Just got my set..... Put em' on and they are very sleek and sexy.

nice job luke!

[luke]

Thanks. :cheers:

[kokak]

Do these take the standard screws, and the window from the standard emag grips?

If so I'll take a set. Ready to send PayPal anytime.

[luke]

Do these take the standard screws, and the window from the standard emag grips?

If so I'll take a set. Ready to send PayPal anytime.

The screws are the same size, but a diffrent type. BUT, I do supply the with the panels, for free.

They do use a stock window, NOT supplied. :)

[kokak]

The screws are the same size, but a diffrent type. BUT, I do supply the with the panels, for free.

They do use a stock window, NOT supplied. :)


I'll take a set with the Panels (and if you happen to have the screws, I'll take those too). Will PayPal you immediately.

[luke]

I'll ship them out today. :cool:

[kokak]

You have cash... :dance:

Thanks

[luke]

Got it, I'll get it out today.

[behemoth]

Whats the hole in there for?

[luke]

Hole?

If you are talking about the one on the back side of the panel, I use that as a hanging point when I powder coat them.

[behemoth]

In the middle of the center cut

wait, is that just a glare?

im really slow today :rolleyes: ;)

[luke]

It's not a hole, it's just part of the design. ;)

[behemoth]

It's not a hole, it's just part of the design. ;)

hahaha, sweet.


Got a pair of Gloss black in stock?

PM me your paypal ;)

[luke]

Yes, gloss black instock.

I'll PM you.

[behemoth]

Yes, gloss black instock.

I'll PM you.

Cant wait till i get em ;)

They'll look killer!

[luke]

Should be there fri. or sat. :cheers:

[behemoth]

omfg theyre SECKSY!!!111 :clap: :clap: :clap: :clap:

[luke]

Thanks :D

[BigEvil]

Luke,

Any chance of getting a set of these raw or matte-blasted like the set with the inserts I got from you?

[luke]

Luke,

Any chance of getting a set of these raw or matte-blasted like the set with the inserts I got from you?

Sorry, they are all powder coated. :(

[Aleis]

Do these have a port for a Warp intelefeed wire? Or would you / how much would it cost to get a set with one?

(Specificly on the panel with window.)


-Aleis

[luke]

Do these have a port for a Warp intelefeed wire? Or would you / how much would it cost to get a set with one?

(Specificly on the panel with window.)

No they don't come with the groove for the wire, I could do it for $5 more...

[player4]

How many more do you have left?


Does anyone have any pics of these on an e-mag? I would like some......

[luke]

I have just a few left.

There a pictures out there floating around. (I don't have an Emag to post any pictures)

[player4]

oh... good point. Well if the ULE milling really makes a difference then yes, but grips don't weigh much so we were going for the outer look more then the over all weight. But if milling the back out of them makes them lighter then I know I'd rather have that then grooves on the front.

Are you planning on making these Luke?
- aluminum (sp) e-mag panels without inserts and without grooves on the front

[AGDlover]

ummmmm why are you guys asking luke to do knotches on the pannels of emag pannels when the frame itself allready has a grove for the intell wire?

[player4]

ummmmm why are you guys asking luke to do knotches on the pannels of emag pannels when the frame itself allready has a grove for the intell wire?

I know, Sk8ermog's post wasn't that coherent. However, if you actually read it, you would realize that we are asking Luke to not put his design on the front of the panels. Thus the word "grooves."

We would perfer if Luke simply made the panels without intserts and without the design on the front. We never mentioned an "intelli wire."

[luke]

We would perfer if Luke simply made the panels without intserts and without the design on the front.

I did several with my last production run, but they were pre paid.

When this batch is gone, and if I do another run, I'll probably do a a few without any designs on the face...

[luke]

Still instock-July 3rd, 05

[xBananax]

Still instock-July 3rd, 05

Still instock? I might be ording if so :)

[luke]

Yes, in stock.

[JESTER22]

Do you do these in diffrent colours? as after a red pair. and would you ship to the UK? :D

[luke]

Do you do these in diffrent colours?as after a red pair.

Sorry Black only.



and would you ship to the UK?

No problem, as long as you pay for the shipping costs. ;)

[JESTER22]

Sorry Black only.




No problem, as long as you pay for the shipping costs. ;)

REALY AFTER A RED PAIR AND YES I WOULD PAY SHIPPING COSTS

[luke]

Well, I have 3 black pairs left... :)

That's the best I can do, sorry. :p

[sleepingbeauty]

Sending you a pm about me some custom grips...

thanks-
Pat

[luke]

pmed you..

[Spaz100]

pmed you..
picks still dont work lol

[luke]

I'm not sure whats wrong, I can see the picture just fine.

For some reason I can't get to the "attachments" to reload the picture. I have been having trouble here on AO all day so I think we are having server troubles again. :(

[Spaz100]

ya it seems like all your other post about your custom work dont load, i used to be able to see them but ever since AO changed thier stuff around i havent been able to.

[luke]

I'll try to reload the pictures again tonight...

[sleepingbeauty]

My emag is so ugly dude acidwash+black rubber = poop

Buy these things people!

send me the pics I will host them :)

MrCleburn@hotmail.com

[luke]

You have mail. :cool:

[latches109]

luke got my grips.

They look great.
They're comfortable too.

Thanks.
here are some pictures:

EDIT: Well I don't know how to put them into the thread but here is a link:
Emag grips (http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=29057)
Emag grips 2 (http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=29058)
emag grips 3 (http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=29059)

[luke]

Nice pictures, thanks.

I have a hard time getting decent pictures of the powder coating, it really reflects the light.

[luke]

SOLD OUT 8-21-05


I'll be doing another production run soon.

[RazorMonkey]

Today's the 21st :)

[luke]

:p :cheers:

[dacnar]

:D Hey Luke just wondering how soon you would have any more emag grips. They look freaking sweet!!!
:p :cheers:

[luke]

Emag panels are instock.

I PMed you...

[craltal]

I'm assuming these are aluminum?

[luke]

Yes, 6061 aluminum. :)

[Arstron]

These panels look great, here are some of the 2 color plastic panels that I just got in. I know I need a new battery casing, but its still a work in progress. :)

http://webpages.charter.net/arstron/Photo_120505_003.jpg
http://webpages.charter.net/arstron/Photo_120505_004.jpg

[Mjlynnjr]

Hey, Luke...

I am interested in some raw aluminum panel grips for my Emag. What am I looking at for price? Feel free to PM me regarding this and thanks again for your time.

-Mike

[luke]

Hey, Luke...

I am interested in some raw aluminum panel grips for my Emag. What am I looking at for price? Feel free to PM me regarding this and thanks again for your time.

-Mike

$32 plus $5 shipping.

:cheers:

[Chrishew09]

Luke-

Do you have any grips with the rubber inserts?

Thanks,
Chrishew09

[luke]

Luke-

Do you have any grips with the rubber inserts?

Thanks,
Chrishew09

Just for the 45 frames, >> http://www.lukescustoms.com/page0013.htm

[Chris Nearchos]

Luke,
would you happen to be able to make e-mag panels without the glass insert hole? lmk.
thanks,
chris

[luke]

What about a filler piece to fill the the hole, I could do them in colors also???

[luke]

OR, if I can get 5 pre-paid orders, I'll make a mold for the windowless panels. It would take 3-4 days..... :)

[Arstron]

how much would it run? :D

[luke]

The purchase price would be the same as the other plastic panels I sell: $15 for a single color and $21 for two.

(These are introductory prices and will eventualy go up, when or how much I don't know ;) )

[Arstron]

The purchase price would be the same as the other plastic panels I sell: $15 for a single color and $21 for two.

(These are introductory prices and will eventualy go up, when or how much I don't know ;) )

doh! Thought you was talking about a filler panel.... just ignore me. :D

[luke]

doh! Thought you was talking about a filler panel.... just ignore me. :D

The filler panel I could do for $3 or $4....

[luke]

doh! Thought you was talking about a filler panel.... just ignore me. :D

My fault, I edited that post to make it more clear. :)

[luke]

A-Tach-One

Here's your Black and Gray panels. The picture is a little dull, they look better in person...

http://www.lukescustoms.com/EM_grey-black.JPG

[A-Tach-One]

A-Tach-One

Here's your Black and Gray panels. The picture is a little dull, they look better in person...

http://www.lukescustoms.com/EM_grey-black.JPG

Even better than I invisioned. Thanks Luke. :cheers:

[luke]

Thanks. They look pretty sharp in the sun. ;)

[luke]

A-Tach-1

Here you go. You can't really see the green in the pictures, but in the sun they have florescent greens in them. The pictures don't do the justice, coolest panels I made yet... :cheers:


http://www.lukescustoms.com/a-tach-1.JPG

[A-Tach-One]

A-Tach-1

Here you go. You can't really see the green in the pictures, but in the sun they have florescent greens in them. The pictures don't do the justice, coolest panels I made yet... :cheers:


http://www.lukescustoms.com/a-tach-1.JPG
YES! that is what I'm talkin bout. :clap: I knew you could do it Luke. I'll take em. Thanks - Eric :cheers:

[luke]

These are the first Emag panels I designed. (They were never released.) If you want a set just ask. :)

http://www.lukescustoms.com/EM-Proto-Panels.JPG

OK, I redid my molds, I can do these in all the colors I offer in the other plastic panels I sell.. :)

[GordDesigns]

NOT FOR SALE :cry:
Those would really work good on the light weight project.

Maybe we can make a deal? ;)

Let me know :cheers:

[11 Bravo]

Far out and Groovy man. :)

[luke]

NOT FOR SALE :cry:
Those would really work good on the light weight project.

Maybe we can make a deal? ;)

Let me know :cheers:

Let me know if you want a set, the molds converted nicely.

[50 cal]

PM sent on the black/blue grips.

Thanks

[luke]

Pmed you..

[Recon by Fire]

These are the first Emag panels I designed. (They were never released.) If you want a set just ask. :)

http://www.lukescustoms.com/EM-Proto-Panels.JPG

OK, I redid my molds, I can do these in all the colors I offer in the other plastic panels I sell.. :)



Are the plastic panels then or?

[luke]

Are the plastic panels then or?

Yes, they are plastic and I can do them in all colors. (Same as the others I do)

:cheers:

[nate2k191]

something like this:

http://students.its.txstate.edu/~kp1143/tos2uo2.jpg


do you think some more white swirled in the grip would look better? i think some more white swirls - then i'll buy them, can you do it?

[luke]

I can do a mostly white over black (or pure white) if you like, but I'm real busy to do test panels for you to choose from. So if you want to buy a set I'll make them for you. Sorry, I'm not trying to be a jerk, I'm just busy, paying jobs get the most attention. ;)

(The set that you PS on your marker is sold, the other black and white ones shown on the first page are still instock.)

LMK...

[nate2k191]

I can do a mostly white over black (or pure white) if you like, but I'm real busy to do test panels for you to choose from. So if you want to buy a set I'll make them for you. Sorry, I'm not trying to be a jerk, I'm just busy, paying jobs get the most attention. ;)

(The set that you PS on your marker is sold, the other black and white ones shown on the first page are still instock.)

LMK...

haha :) you run a nice grip business. i'll paypal you now if you make me some like the ones i photoshoped on my mag, except with a bit more white in the top left... so its more balanced :ninja: im picky i guess

[luke]

It doesn’t work like that sorry.

There is NO WAY to control the pattern of the colors. The raw materials are a 2 part liquid (like water) that is poured into a mold through a hole about 1/2 the size of a pencil. All I can control (kind of anyway) is the dominate color when doing 2 tones.

[nate2k191]

It doesn’t work like that sorry.

There is NO WAY to control the pattern of the colors. The raw materials are a 2 part liquid (like water) that is poured into a mold through a hole about 1/2 the size of a pencil. All I can control (kind of anyway) is the dominate color when doing 2 tones.

i see, i thought it was more like chocolate molds... in that case... just do the best you can to duplicate the ones i PS'd and mabey add a bit more white in the mix.

[luke]

PMed you..

[RRfireblade]

Those top ones (post 1) are aluminum?

[luke]

Yes, they are aluminum.

I sell them in both plastic and aluminum.

[RRfireblade]

Same price whether raw or PC?

Any break on more than one set?

[Jotsy]

do you still have any gloss black aluminium panels?

[luke]

Yes sir, I do. :)

[Jotsy]

you have a pm, good sir ;)

[luke]

OK, they're packaged and ready to ship tomorrow morning.

Thanks, :cheers:

[DoritoBandito77]

As if you can't tell from the previous 112 post… Luke can be trusted and you shouldn’t hesitate to order anything from him. I have done business with him on more than one occasion now and he is the most prompt person or business I have ever dealt with over the internet. He is fast and provides quality services, most of witch just aren’t available anywhere else.

So … thanks for everything I am very pleased.

Here are some pics of his work:

On/off switch + led on light for warp
Warp 45elbo (I love that thing… really makes a difference for hopper clearance)
Warp mount bracket
Emag panels (bull’s-eye / black&blue )


pix here:
http://www.putfile.com/91firehawk

<a href="http://putfile.com/pic.php?pic=6/16700051567.jpg&s=f5" target="_blank"><img src="http://f5.putfile.com/6/16700051567-thumb.jpg" border="0" alt="" /></a></div>

[luke]

Don't know how I missed that picture, thanks for the post.

:cheers:

[FiXeL]

Luke,

Got the grips today with the warp elbow. Thanx man! They really look seksy on my xmag!
:cheers:

[luke]

Thanks. :)

[FlawleZ]

Luke,

If there was enough interest in a particular design for a mold say, you didn't own, would you consider making/purchasing it?

[luke]

Luke,

If there was enough interest in a particular design for a mold say, you didn't own, would you consider making/purchasing it?

Perhaps, what did you have in mind?

[PsychoBaller]

Resurrecting threads from the Grave. Just placed and order with sir Lukage, for a set of E-Mag 45* GripFrame Panels.

thanks,

-baller