on/off pin longer than .750????

[Scott Hudnall]

Is there an on/off pin longer than .750? I got a .750 for my Emag valve, to use as mech only. Still, it has a significant amount of reactivity. BradAGD suggested that I still needed a longer on/off pin. The Emag valve is a double o-ring type.

suggestions?

[Dayspring]

The old RT Pro was .765"

[Tunaman]

I have them all the way up to .770 ;)

[Scott Hudnall]

I found the problem. the RT PRO sear was not fully "seated" on the roller/bushing which the sear pin goes through, causing the sear to be off-set a bit and not to fully engage the on/off....in fact it was pushing against the emag body. You can imagine trying to figure this one out....a number of things go wrong in that scenario....LOL.

Still, the .750 has a decent amount of reactivity, but a very nice short "flick" of a trigger pull.....very nice. I'll keep it like this for a while, but if it bugs me too much I'll get a longer pin.

Thanks guys.