PDA

View Full Version : dye autococker 2003


aznruffryder13
03-11-2005, 09:49 PM
Hi guys..can you guys help me out? i have a dye autococker 2003..everytime i shoot..the balls just fall out of the barrel..i have dye boomstick..and using ALL-STARS paintballs..
p8ntball365
03-11-2005, 09:51 PM
try turning your lpr up?? That happened to me, and i turned my lpr up and bam 280
but I am no expert so dont hold me to it
CoolHand
03-12-2005, 04:17 AM
Do you mean you are getting no velocity, or that they balls roll out of the barrel when you tip it down? The answer is very different, depending on which one you mean.

Tell me that, and I will render what aid I can.
kenndogg
03-12-2005, 04:59 AM
http://www.moodypaintball.com/pages/tech/trouble.htm
aznruffryder13
03-12-2005, 06:15 AM
thanks..ill try all this stuff later in the afternoon
octane2079
03-12-2005, 10:46 AM
Make sure your bolt isn't upside down.
p8ntball365
03-12-2005, 03:38 PM
If its when your not shooting, its your detent.
nastymag
03-12-2005, 04:10 PM
Actually turning the LPR up wouldnt do anything , it doesnt affect velocity in autocockers.
and if its rolling out when he points it down it means his barrels bore is to large for the paint. the detents in autocockers only keep from double feeding.
punkncat
03-13-2005, 11:46 AM
Make sure your bolt isn't upside down.

I don't think you can put a Dye bolt in upside down. Its got a milled area all the way around, not a hole. That is of course assuming it has the stock bolt....although that was my first thought.


If its when your not shooting, its your detent.

The detent merely keeps it from double feeding. Remember, this is a closed bolt marker....


Really need more details.
MonsterMag
03-13-2005, 01:33 PM
Balls rolling out barrel = New Detents ;)
Mr. Mouse
03-13-2005, 01:35 PM
it could be the timing, or anything, thats why i got rid of my cocker cause i was fixing it alot and got annoying, it could be a number of things cause i had that problem with my cocker also
nastymag
03-13-2005, 01:43 PM
man how many times can we say this ....Detents only keep cockers from double feeding !!!!
punkncat
03-13-2005, 03:32 PM
it could be the timing, or anything, thats why i got rid of my cocker cause i was fixing it alot and got annoying, it could be a number of things cause i had that problem with my cocker also


Umm good point.

Check this......air up the marker. Pull the trigger back really slow. You should be able to make it fire and have a "dead spot" right before the back block moves back. If the 3way is timed too tight then the block will come back and hit the cocking rod before the hammer has fully opened the valve.
CoolHand
03-13-2005, 06:56 PM
Balls rolling out barrel = New Detents ;)

No, ball rolling out the barrel = bore too big, when talking about a cocker.