PDA

View Full Version : momet of truth for hyperframe!!!!


mag88888
03-17-2005, 08:10 PM
if i have a 20 bps boarded hyperframe how will it compare to other guns on the tourney field? what guns can it compare to? if i do the trigger job to it how will it compare? i want to have a big discussion here. i would like to know what im getting.
hitech
03-17-2005, 08:39 PM
Use a ULT in the valve and it will perform very well. It doesn't ramp and has proper switch debounce (doesn't bounce). You can get the switch VERY light and possibly get a little mechanical trigger bounce. Learn to rake the trigger (rake all the way to the bottom and back) and you should be able to approach 20bps.

:cheers:
JoshK
03-17-2005, 09:04 PM
Use a ULT in the valve and it will perform very well. It doesn't ramp and has proper switch debounce (doesn't bounce). You can get the switch VERY light and possibly get a little mechanical trigger bounce. Learn to rake the trigger (rake all the way to the bottom and back) and you should be able to approach 20bps.

:cheers:

The 20 bps board doesnt ramp? My 13 does :)
mag88888
03-17-2005, 09:23 PM
how fast legally? by raking hitech, is that legal in the way you were talking about it?
Chronobreak
03-17-2005, 09:25 PM
its going to depend on YOUR abilites as the setup of the switch.

i would say as fast as a normal electr not bouncing.13-15?

other than that depends how fast you can walk/rake

raking is legal. bounce or ramp modes arent..o wait yeah they are.. :rolleyes:
p8ntball365
03-17-2005, 09:34 PM
lol^^.

I think you would have a tough time going up against markers like timmy's and dm$'s. bet thats my 2X10 to the -2 power.
mag88888
03-17-2005, 09:46 PM
what other modes does the 20 bps hyperframe have?
onedude36
03-17-2005, 10:23 PM
I'm pretty sure theres a semi mode and a semi mode :D

But then again I dont even have mine yet :D
Enemy
03-18-2005, 02:25 AM
danm you gonna make me go put a battery in it again!!

there is semi adjustable rof

burst adjustable rof and 3-5 shot burst

semi burst adjustable rof up to 20(fullauto)
Sk8ermog
03-18-2005, 06:14 AM
I have tuned my 20bps hyperframe to outshoot my halo now. I will post a video pretty soon to prove that mags can keep up with other guns out there. I have a really fast half-block eblade that can't shoot as fast as my hypermag. I have used my hypermag in the last 2 tourney's I've played in. I kept my Freestyle and eblade as my back up, but never needed them. Everyone thinks I'm shooting a shocker or ION, but when I tell them it's a mag they laugh. I love my hypermag and it's fully walkable and with the LvL10 I don't chop even when shooting 16+bps.
onedude36
03-18-2005, 09:04 PM
^^^
Hey sk8rmog, do you have a link to the 20 bps board? I am looking for an aftermarket board. :D
Sk8ermog
03-18-2005, 09:07 PM
contact Centerflag:

http://www.centerflagproducts.com/
onedude36
03-18-2005, 10:02 PM
I have been searching that site for awhile now. I still cant find it :cry:

Do I have to email them? I did anyway.
Automaggot68
03-19-2005, 03:13 AM
The 20 bps board doesnt ramp? My 13 does :)

No it doesn't, and you're a moron.
SpecialBlend2786
03-19-2005, 03:31 AM
No it doesn't, and you're a moron.

lol....
master_alexander
03-19-2005, 10:30 AM
or if you did the spydermag mod then you could put the 36bps board AND ramping chip in. that is a pretty fast spyder. :D i was pondering the spydermag mod on my micromag... what a great small fast project! (i can't wait)
Gumbe
03-19-2005, 03:10 PM
The 20 bps board doesnt ramp? My 13 does :)

no it doesnt it hyper mod...good try ;)
JoshK
03-19-2005, 06:31 PM
No it doesn't, and you're a moron.

Isnt ramping where you pull it slowly and it ramps up to a faster speed? Thats what I thought so.
Gumbe
03-19-2005, 07:09 PM
ok i have a hyper frame from center flag...and the trigger on it the guy that owned this befer me well i hate his trigger...it crap...i wana know if there is any way i cna ajusete it...i knotice there are 2 screws on the frame right by the trigger
JoshK
03-19-2005, 07:13 PM
the screw next to the trigger hold the switch in place...the triggers can not be adjusted...you can get a lighter switch though.
Gumbe
03-19-2005, 07:24 PM
man i just want it a little farth out from the switch...it light but there no room i tuch it shot...i dont like that i like there to be like 2mm of little bouncing space..if that make scense
JoshK
03-19-2005, 07:27 PM
It would be easier to understand if I knew what you are saying...but I pretty much get it. I'm not sure how you could do that...maybe sanding down the back of the trigger where it contacts the switch.
Gumbe
03-19-2005, 07:29 PM
well can i replace this trigger with a blade trigger?..or what? or should i just think of getting a new frame.
JoshK
03-19-2005, 07:48 PM
You could look into a pnuemag when they come out...or you could talk to Luke about something he might be able to do to help you with your problem...


Sorrry for the hyjack mag888
moed59
03-25-2005, 10:02 PM
the hyper setting is the same as ramping but it caps at 10bps
JoshK
03-25-2005, 10:07 PM
the hyper setting is the same as ramping but it caps at 10bps

Ya.
UltraMag527
03-26-2005, 09:04 PM
Are you talking about cutting the spring or a particular switch (what type)?
onedude36
03-26-2005, 11:31 PM
http://www.pbnation.com/showthread.php?s=&postid=11594306#post11594306
^^^
50g switches

you can also check ebay, there are usually some there.

Aren't I helpful :D

EDIT: I found that I had to sand the switch so it would fit, but it feels so much better :D
AnthonyDStone
03-29-2005, 12:07 AM
My hypermag is fast and alot more reliable than most other "tournament level"high end electros,no eyes to worry about cleaning,Even with a classic I could get 15 bps with my hyper frame,can't wait for my new valve!

Tony
UltraMag527
03-29-2005, 12:50 PM
ordered the 50g switch. Would the 20 pbs would be the next step?