Trigger and Hall Question

[AGD202]

Could any1 explain to me how exactly the magnet in the back of the trigger and the Hall works together on the emag.... and how far away it is supposed to be...
just anything on how they work please

[Skywalker]

Well I can't get into too much detail b/c I really don't know what I'm talking about. :p

Basically when the Hall sensor detects the magnet within a certain distance the solenoid, sear, etc. is activated, thus causing the marker the fire. Sorry that's the best I can do.

As for how far away is the magnet supposed to be. I've seen people get their trigger pulls down to about 1mm. On my X-Mag the trigger pull is about 2mm. If the magnet is too close to the sensor even before you turn the gun on, then the marker will not fire.

Hope that helps a little. :cool:

[BlackVCG]

Skywalker pretty much summed it up.

Google "Hall Effect Sensor" and see what you come up with. You'll find plenty of explanations on the theory. There are many other uses for hall effect sensors. Ideally applications where a lever switch can't be used for whatever reason.