beretta trigger spring

[misfit]

i have a beretta model 87t, how the hell do i get the trigger spring back in there
http://www.berettaservices.com/Moduli/ContentManager/publicfiles/PDF%20Esplosi%20Arma%20Parti%20Speciali/e8100.pdf
part #14 it looks like all of the model 8x series are the same or atleast that part, and it is prob similiar to the 92 series, any help would be appreciated

[Blennidae]

I also own a Beretta 87T. Unfortunately I can't answer your question. You might get better results asking here http://www.berettaforum.net/cgi-bin/ubbcgi/ultimatebb.cgi hope that helps.

[misfit]

i just got it two seconds ago, man is it a pain in the but, makes me like my 1911 more. the spring runs throught the pin you need to push for the takedown lever and the rest of the spring sits in the slot in the trigger. the axle for the slide relese goes through the bottom hole on the trigger and the second coil on the spring then you have to lift the hook part on the back of the spring as you insert the pin from part 18 into the top hole on the trigger and then you can releve the tension on the hook part and let it lay back on that pin. a head lamp and a small screwdriver help,

[Steelrat]

Did it come out, or break? The 92's trigger spring is prone to failure. Take it to an armorer, the probably wont charge much.

[Blennidae]

After reading that, I hope mine never needs replacement... :eek:

[misfit]

i removed it, but not really on purpose