My almost completed mag!

[AGDlover]

Well over the time i've been on AO I've been Building my mag in mind with the idea of in the end haveing a gun completely one of a kind. Well I'll start off from the begining. I Started with a PBgear 68 Classic TKO mag. Then with a drop, warp and a coupple other goodies i had this:
<a href="http://www.jayloo.com/files/pics/2000/Mag2268.jpg"> <img src="http://www.jayloo.com/files/pics/2000/Mag2268.jpg" width="224" height="149"> </img></a>
The some more modding I finally got a flatline, ULE body, Intell, and some other stuff includeing a lvl10
<a href="http://www.jayloo.com/files/pics/3000/AO-IL disk Photo Mag 25893.jpg"> <img src="http://www.jayloo.com/files/pics/3000/AO-IL disk Photo Mag 25893.jpg" width="512" height="366"> </img></a>
OK then I didnt upgrade for a while untill a ment another AO member that lived somewhat close to me Named Joez and he had his Emag which I ran while i was still in the process of tuneing that damn ULT on a classic valve :mad: . Well needless to say within a week I bought the lowers from him for around $175 :eek: but the noid was shot and the board buttons had been broken off. no in this next pic it shows it with a RT valve. That would be Jayloo's old RT valve i barrowed for a day.
<a href="http://www.jayloo.com/files/pics/6000/100_20517545.JPG"> <img src="http://www.jayloo.com/files/pics/6000/100_20517545_rs.JPG" width="600" height="450"> </img></a>
Then Talking to Joez again I found he had a Xvalve for it! Also got it madd cheep for 145 and I bought it and he Came to my school which wasnt far from him so he stoped by on my way to the buss so I bought it.
<a href="http://www.jayloo.com/files/pics/8000/curntemag_9332.jpg"> <img src="http://www.jayloo.com/files/pics/8000/curntemag_9332.jpg" width="512" height="239"> </img></a>
Now with the Frymark Frenzy I picked up a pair of the Lady Pannels a day after they came out with them.
<a href="http://www.jayloo.com/files/pics/13000/Img_0298_5347.jpg"> <img src="http://www.jayloo.com/files/pics/13000/Img_0298_5347_rs.jpg" width="600" height="450"> </img></a>
Then I found a awsome Dealer on AO named Luke. He hooked me up with his new Toolless QD Air/warp mount thingy and I loved it. He even throgh in a free set of his Custom emag pannels since I was pachent on wateing for it.
<a href="http://www.jayloo.com/files/pics/16000/IMG_0634_8811.JPG"> <img src="http://www.jayloo.com/files/pics/16000/IMG_0634_8811_rs.JPG" width="600" height="450"> </img></a>
Then after kinda sitting around looking at my gun for a while I saw it needed something custom. Something 1 off. I saw Luke was doing Custom railmilling just what the Dr ordered! Well after a long process of talking with him throwing ideas left and right and drawings we settled on an Idea. And now that Its back from milling the thing looks beautiful!
<a href="http://www.jayloo.com/files/pics/23000/IMG_1145.JPG"> <img src="http://www.jayloo.com/files/pics/23000/IMG_1145_rs.JPG" width="600" height="450"> </img></a>
And all that is Left is a battery Pack milling which I'm in the process of doing and 1 other date with the mill you'll all have to wate for but trust me It'll be worth it.
OH ya I've code named this Emag: The black Monster" Even though it sits at 11inches high.

[joez]

Ah the memories that gun brings back. Hard to believe that e-mag started life as a $50 bag of parts, a minimag, and one long night of tinkerning. My co workers called it the "creation", because it was a frankenstien of markers and parts.

It looks awesome, its hard to look at it and remember what a fugly marker it was. I even got the comment from one of the AGD tech's that it was the most hideous thing he had ever seen :D Glad it went to a good owner.

[Maggot6]

I skipped some of the steps you took....
But I think if I wanted to wait I would have enjoyed building it from scrap better
Nice mag :)

[AGDlover]

ya its been around 2 years so its time consumeing but i allways just reminded myself "It'll be the best once its done"

[player4]

That is one awesome marker, makes me want an e-mag.

I do have a question though:
Do you have any of the orginal parts on the e-mag?

[AGDlover]

the batt pack and trigger fame are still origional i have the stock pannels laying around i kist threw on Lukes pannels and they look better on my emag then the frymarks

[AGDlover]

common ppl i see a good amount of you all looking at it I dont care if you ask questions and post comments

[TMAXXKING1]

it needs a tunapack ....

that thing looks a hell of alot better in the end then it did when you first got it .. :clap: :clap:

[AGDlover]

dont worry i allready got somethan planed for the Batt pack i figure whats the point of haveing moded parts of your own if there not something you put your own time into thinking of instead of just going out and buying something that really doesnt fit what your trying to acomplish.

[jenarelJAM]

i've got a question, for all the people who start with 68 classics and upgrade them one part at a time, what happens to the parts you upgrade from when you're done with them. If you start with a 68 classic, upgrade to xvalve, intelli, ule body; couldnt you just take your old cast off pieces and turn it into a new gun. Dont you basicly have your old gun(in pieces) plus your new gun which is made from all new parts?

[AGDlover]

i sold my stuff to buy new stuff :D

[Sk8ermog]

got to love that Luke for his custom work. Looks good.

[AGDlover]

yup like it says under my name Luke is my hero!!!

[txaggie08]

is luke still doing custom milling.....may talk to him :)