URGENT I need to see the inside of a retro valve

[PaInTbALL zAcH]

Someone please take a picture of the inside of the valve. LIke when you unscrew the reg from the valve take a picture of what is visible in the reg. PLEASE! also write any problems you had when you first got it. I just got it yesterday and it worked fine yesterday but today when i gas it up it just blows air down the barrel. The trigger also goes totally dead it really sux. I already tried changing spacers but none helped. PLEase someone help becuz im goin to play 2morrow.

[PaInTbALL zAcH]

forget the pic just tell me how to fix it

[kilaueakid]

what kind of air tank are you using? Most the time when this happens it is because there is not a big enough blast of air hitting the valve. Some people you pro-connect fitting to achieve this, or it helps if you have a tank with an on/off like the flatline. Hope this helps. I had the same problem with my RT by the way and I just got a pro-connect and it solve all the problems.
good luck
kila

[PaInTbALL zAcH]

thanks. I put 2 drops of oil in the on/off and it works fine now. It has no leaking and i love it again.:D

[Dubstar112]

there is pix in the technical section of www.G3pb.com

[st6212]

You either need to put more lube in.

Or you may have some teflon tape stuck in the valve.