Devil mags???!?!?!?!?

[Chris_automag_07]

worth it or not?
who has one ........pics?
how do set the trigger mode.
somebody tell me about it.
thanks. :confused:

[jaredborne]

They look awesome. I wish I had the dough to get one

[magman007]

my only complaint about the devil mag is the insisting of using level 7. more efficient yes, but mags chopping problem wasnt due to mis fed balls, it was due to excruciatingly high bolt speed. Putting level 7 in a devil mag, is just asking for more ball breaks, especially with how brittle paint is getting now a days.

other wise, despite crappy efficiency, the devil mag is great. mags in general are gashogs

[mandatory]

i have one on order...been waiting about 2 months...not too bad...it should be pretty rippable...as for the level 7...theres eyes. cost quite a pretty penny and you have to pay up front...meaning once you pay its by by mag for a while....ill be making a video of all the fiering modes as soon as mine gets here.

[BD_Paintball]

i have one on order...been waiting about 2 months...not too bad...it should be pretty rippable...as for the level 7...theres eyes. cost quite a pretty penny and you have to pay up front...meaning once you pay its by by mag for a while....ill be making a video of all the fiering modes as soon as mine gets here.

You do that I want to see another vid. And then we can believe the hype. I personally would not get one b/c its still a mag and they are major gas hogs.

[fire1811]

Im waiting on the PTP frame

[Spacemanvic]

BD:

As if Mags are a bad thing?



You do that I want to see another vid. And then we can believe the hype. I personally would not get one b/c its still a mag and they are major gas hogs.

[BD_Paintball]

BD:

As if Mags are a bad thing?
they are very bad when it comes to air. i had a mag and they sucked when it comes to being efficient, they also sucked at a few other things but im not going to bring it up b/c then ppl will start crying again. :cry:

[SteelSoul]

I wonder if you just have to use the lvl 7 bolt.
Didn's some other companys like ANS make the Phases II bolt for the mag?
Wasn't that a upgrade over the lvl 7 bolt?
Perhaps some "other" people could make a new mag bolt for the Devil mag type of operation.
Heck if you have a X-Mag or a E-Mag with eyes you dont need the lvl 10 bolt correct??

Something to think about.

:headbang:

[yakitori]

Devil mags are nice, but overpriced IMO. It does have the predator board which has many diff firing modes though, and BB eyes.

I just feel it would be better to spend my 900+ bucks on a DM4 or something. That is why I feel its overpriced.

However, they are a rare gun, and not many have them. If that is your thing, then go for it. Its a nice gun.

[Beemer]

but mags chopping problem wasnt due to mis fed balls, it was due to excruciatingly high bolt speed. Putting level 7 in a devil mag, is just asking for more ball breaks, especially with how brittle paint is getting now a days.


High bolt speed, What?? You got it right the first time.[miss feeds]
I can and have shot level 7 all day, week, month long on Classic, RT and EMag with out a CHOP. Its all in the finger and the feed

http://home.comcast.net/~beemerone/SigPic.jpg

[peewee]

Wow Personally I have never thought mags had "bad" efficiency. Average yes but not bad. BD ever tried a brick shocker?? I had a 2000 & was lucky to get 450 balls off a 68/3000. Now thats "bad". Loved the gun but that was sucky air usage.

[boggerman]

High bolt speed, What?? You got it right the first time.[miss feeds]
I can and have shot level 7 all day, week, month long on Classic, RT and EMag with out a CHOP. Its all in the finger and the feed

http://home.comcast.net/~beemerone/SigPic.jpg

Agreed, when I had my first classic mag, all my chopping problems went away when I added a warp feed/intelliframe/gen 1 superbolt (still level 7) to it. I believe it was mainly the warp, but I did them all at once, so I can't say with absolute certainty.

And for steel soul, the ans bolt is a p.o.s., they wear quickly and are no better than a stock bolt. Also level 7 vs. level 10 is much more than simply just the bolt, changing the bolt without changing other parts will still be a level 7.

[UTDragun]

diablo/tmc/dm3 matrix is the worst efficiency ive ever seen, with an 88/45 if you walk about 15 or so you can see the needle moving as you fire, now thats bad

[yakitori]

diablo/tmc/dm3 matrix is the worst efficiency ive ever seen, with an 88/45 if you walk about 15 or so you can see the needle moving as you fire, now thats bad

but an HE bolt can alleviate that. How can mag efficiency be allevieated. Im not saying its the worst efficiency of any paintball gun, I just dont like getting my tank refilled when the gauge says 1000psi left.

[bound for glory]

not that i'm bragging about my devilmag :rolleyes: but i've shot 3 cases through mine and no breaks. the eyes do away with any chop problem. my wife was at wal-mart the other day and thought of my new devil and bought me 2 200 round containers of scorch paint. and we all know how good wal-mart paints gonna be, right? all 400 shot. no breaks. :shooting: i don't need no stinkin' lvl10.

[yakitori]

not that i'm bragging about my devilmag :rolleyes: but i've shot 3 cases through mine and no breaks. the eyes do away with any chop problem. my wife was at wal-mart the other day and thought of my new devil and bought me 2 200 round containers of scorch paint. and we all know how good wal-mart paints gonna be, right? all 400 shot. no breaks. :shooting: i don't need no stinkin' lvl10.

actually, scorcth is not all that bad. I think its the best balls that walmart sells. They are small bore though. I shoot them through my viking and they work great. They can be a bit brittle depending on how fresh they are though.

[Chris_automag_07]

what is the ptp frame?????, pnuematic trigger pull?
does anyone have pictures of thier devilmag?

[BerSerK]

if mags have average air effiency, what tank size do you suggest at 3000psi ? I was thinking of getting a 68/3000.

[fire1811]

what is the ptp frame?????, pnuematic trigger pull?
does anyone have pictures of thier devilmag?

yes its a pneumatic trigger pull
all info

http://www.pbnation.com/showthread.php?s=&threadid=858092

[Eatem Alive]

if mags have average air effiency, what tank size do you suggest at 3000psi ? I was thinking of getting a 68/3000.
get a 68/4500 hp

[nt2004]

get a 68/4500 hp
yead definately. You can get around 600-700 shots of a 68/3000 if you are lucky. With a full 68/45, you get get around 1000 or so

[Doobie]

You decide if they are woth it. link to me shooting mine (http://www.oldskoolindustries.net/wildpbforum/showthread.php?t=976)

let me know what you think!

[mark_1791]

You decide if they are woth it. link to me shooting mine (http://www.oldskoolindustries.net/wildpbforum/showthread.php?t=976)

let me know what you think!
I can't see it, cause you have to be a member to download it. Can you post it on Jayloo or something?

[Doobie]

I can't see it, cause you have to be a member to download it. Can you post it on Jayloo or something?


I'll try Jayloo. It's a free forum and they have pic and 150mb vid upload so it's woth it IMHO.

[BerSerK]

yead definately. You can get around 600-700 shots of a 68/3000 if you are lucky. With a full 68/45, you get get around 1000 or so

I can't get a 4500psi fill, I will refill from a scuba so I should get a 72ci or what... :confused:

[mark_1791]

I can't get a 4500psi fill, I will refill from a scuba so I should get a 72ci or what... :confused:Depending on whether you like normal or stubby, get a 68/71 or a 88/90. Since you can't get 4500, I would say get an 88. They get about the same as a 68/45

[nt2004]

I can't get a 4500psi fill, I will refill from a scuba so I should get a 72ci or what... :confused:
maybe just buy a crossfire 68/3000 and save up about 50 bucks or so later on down the road and pick up a 45/3000 as a backup tank

[CKY_Alliance]

Here are pictures of a few devil mags and what the frame looks like
http://devilsden.tv/DM-pics.htm

The 90 degree frames are the frames you can buy form GA/chris and the 45 degree frames are hyper frames with predator boards in them.I believe you can still get hyperframes from centerflag if you call and you can get them used.

[nippinout]

my only complaint about the devil mag is the insisting of using level 7. more efficient yes, but mags chopping problem wasnt due to mis fed balls, it was due to excruciatingly high bolt speed. Putting level 7 in a devil mag, is just asking for more ball breaks, especially with how brittle paint is getting now a days.

other wise, despite crappy efficiency, the devil mag is great. mags in general are gashogs

magman007, you are a boob. Mags are not gas hogs. They have a moderate efficiency. They are in no way gas hogs.

Shoe Box Shocker = Gas Hog
You don't need a 40oz. CO2 tank to last a game with a Mag.