PDA

View Full Version : Very REACTIVE



kneshoba
05-03-2005, 05:42 PM
I jUst bought a ULE RT with ULE trigger. I put on my new pure energy 72 cui stubby and the marker will not single shoot it's like a machine gun, even when i hold the trigger down. The tank is a high pressure tank. Could any one help PLEASE.

Thanks

kneshoba

Counterfeit_Syn5304
05-03-2005, 06:02 PM
you probably put too many shims on the trigger.

D-Block
05-03-2005, 06:16 PM
you probably put too many shims on the trigger.


Yep, try taking 1 off until it stops running away

kneshoba
05-03-2005, 09:02 PM
Thanks but I
Pulled shims one by one and tried with each removal and it is still "running away" Any other ideas ?

tipp-ed off
05-03-2005, 10:27 PM
Whats your velocity at. I find if I turn mine down to around 275fps I loose some of the reativity.

68AutoMoose
05-04-2005, 09:23 AM
Same thing happened to me. In my case it was actually the carrier oring that was bad.

athomas
05-04-2005, 09:28 AM
Was the gun purchased new?

kneshoba
05-04-2005, 07:00 PM
Yes the gun is new everything was installed for me by airgun came from them with a chrono speed of 286 fps per the slip but im unable to chrono due to its machine gun activity.

personman
05-04-2005, 07:25 PM
Try to tighten the field strip screw in the back of the marker with an allen wrench. ( dont strip the screw though.)

D-Block
05-04-2005, 09:10 PM
Do you have trigger stops? Make sure your sear rod isn't hitting your trigger when you gas up. If it's new it probably isn't.

Tunaman
05-04-2005, 09:21 PM
did you take it apart? Maybe you lost the large oring down in the on/off cavity. Let us know ;)

kneshoba
05-06-2005, 09:40 PM
Found the Problem when U take the back of the valve off the pin on the front half had the o ring from the back half on it whicjh was causing the machine gun activity or running away. Thanks to everyone who reponded to my thread.

Kneshoba