lvl 10 ka-chunk?

[HarrysSon]

I've got lvl 10 on my e-mag and I shot it before and it worked fine but the next week the valve was coughing and balls weren't gettin shot at all and were only shootin 1 foot at the most (yes I had enough air and the bore size was right)

[HarrysSon]

can anyone tell me whats wrong??

[p8ntball72]

can anyone tell me whats wrong??
check to see if your power tube tip is broke...that sounds like what happend when i broke mine :(

[jenarelJAM]

this would be better in the tech section, but you might want to take apart the xvale and make sure everything is fine in there. if its the power tube thing, i dunno...

[TheTramp]

Really soak that bad-boy down with PB oil then fire it 30 or so times. It's amasing how often this fixes the problem.

Also make sure your velocity screw is in enough. Back it most of the way out then tighten it half a turn at a time till you get the FPS you're looking for.

The L10 needs a good amount of velosity. In fact, I've found that I almost cant use my E-Mag with L10 if I'm at an indoor field that has a 250fps limit. It wants at least 265+ in my case.