How do you take the IFrame trigger out?

[Omicron]

How do you take the intelliframe trigger out? and i also asked if AGD sold individual triggers yet, but they haven't responded.

[PyRo]

There is a little pin going through the frame, which also passes through the trigger. It should be right ontop of the trigger. You just knock that out with a punch. There is a certain way you have to go, either right-left, or left-right, i'm not sure which way it is with the intelli though.

[Omicron]

ok, define "right-left, or left-right"

do you just knock it out with blunt piece of metal by one side?

[PyRo]

If your looking at it pointing straight foward, you want it to come out of the left side. So you knock it out from the right.

[Omicron]

so if the gun is pointing to the right

>>> pball comes out this way

i have to knock it out from this sideout to the other side??

[PyRo]

Point the thing like you would when your shooting. Now you want the pin to come out of the left side of the frame. Theirfore you hit it from the right side, to force it out the left.

[Omicron]

thanks, and i got a price from JoAnn, $20 for a trigger if anyone wanted to know. I wonder if there wil be a deal like if you buy a blade and a groove, you get $5 off :D

[PyRo]

$20 for the blade? Ill throw that on the bottom of my list of stuff to get :)

[Omicron]

i was going to get one, but i dont know anymore. If i figure out how to get the pin out :D i willget one

can you take pictures of what tools you use and which side to hammer out?

[PyRo]

Hmm, no digital camera :(
I just used a nail setter deale thing.

[Omicron]

do you know anyone that has a digital camera? can you get a picture of the nail thing on the internet, like at a website? thanks

[Thordic]

Just go to the hardware store and ask for a nail set. They are cheap :)

[PyRo]

Just be sure to get one small enough for the trigger pin. You could also just cut the tip off a nail and use that.