PDA

View Full Version : Custom Warp Brackets



luke
06-04-2005, 03:57 PM
$25 plus shipping

Info can be seen here>>
http://www.lukescustoms.com/warpfeed.html

http://www.lukescustoms.com/uploads/3/5/1/4/3514501/2937938.jpg?178

http://www.lukescustoms.com/uploads/3/5/1/4/3514501/9978801.jpg?170

UltraMag527
06-05-2005, 06:55 AM
Will this work with a a CP on / off ASA?

luke
06-05-2005, 09:48 AM
This has a standard dovetail mount and a 2 hole (3/4" on center) mount, so it should work with any standard ASA.

chairman_mao
06-13-2005, 01:12 PM
Do you make a rail and forward warp combo?

luke
06-13-2005, 02:07 PM
Do you make a rail and forward warp combo?

I did, but they have been discontinued. The only combo setups left are at the top of this page. These too will be discontinued when current supply is gone...

chairman_mao
06-13-2005, 02:37 PM
DAMN!!!! If only I had that blasted time machine finished :cry:

luke
06-13-2005, 02:57 PM
DAMN!!!! If only I had that blasted time machine finished :cry:

If I didn't have to sell them for $12 I would still be making them. ;)

Soopa Villain17
08-08-2005, 05:07 PM
can you fix the pics , they dont work , i just got a warp and dont like how its angled, so i might be interested in what you have, thanks

luke
08-08-2005, 06:25 PM
PM me your email address and I'll send you some pictures.

ThePixelGuru
11-02-2005, 07:54 PM
Luke, still got any of those #WF-04s left? And how "stable" are they? Like, hypothetically, if I beat a squid over the head with my warp or tank, how much would it move relative to my 'mag?

luke
11-03-2005, 08:48 AM
Luke, still got any of those #WF-04s left? And how "stable" are they? Like, hypothetically, if I beat a squid over the head with my warp or tank, how much would it move relative to my 'mag?

Well they are stable, but I'm not sure how they would hold up against a squid.
:D

They are currently out of stock and I haven't decided if I'm going to make more or not.
The drops are already made, I would only need to make the bracket. There is one other guy asking for one too, I suppose if you guys were willing to pre pay I would make a few. It's up to you guys. (Wouldn't take too long)

ThePixelGuru
11-04-2005, 03:45 PM
I'm down for the pre-pay and the wait, assuming it's more stable than my stock Warp bracket (it's noticibly loose after a couple games). I'll PM you in a bit.

luke
11-06-2005, 12:44 AM
Sending you a PM...

python1577us
11-06-2005, 09:19 PM
Could you put some pics together, I would like to see how it looks when mounted with a tank.

luke
11-07-2005, 09:26 AM
Are you referring to the bracket that "ThePixelGuru" was asking about? My website does have pictures of how my brackets mount. They are all basicly the same, just diffrent designs.

WF-01>> http://www.lukescustoms.com/page0003.htm

WF-02>> http://www.lukescustoms.com/page0004.htm

python1577us
11-07-2005, 10:18 PM
The 1st picture, the mount for the warp is a drop aswell?

luke
11-07-2005, 11:13 PM
No, the links I provided were for brackets only, they mount between the drop and grip frame. I do have drops also though, do you need both?

Dark Side
12-14-2005, 09:59 PM
Luke,
I'm looking for a custom warp mount for my upcoming longbow conversion. Basically I want the mount to be able to attach to the 3 frame screw holes on the side of the RT/tac/ whatever else might have them rail. And the other side to attach to the back of the warp like your other customs do. Able to do this or is it a pipe dream. I will not be running a drop forward because it will be to low and unbalanced. Thanks in advance. Will

luke
12-15-2005, 08:51 AM
Basically I want the mount to be able to attach to the 3 frame screw holes on the side of the RT/tac/ whatever else might have them rail.

You lost me.

Are you talking about the foregrip mounting holes on the RT Pro rail?

Dark Side
12-16-2005, 09:26 PM
as you look at the side of the rt rail. there are 6 screw holes. I would like the warp adapter to fit the 3 back ones above the trigger frame.

luke
12-17-2005, 11:17 AM
How long do you want the bracket? (between the rail and the inside of the warp)

Powder coated black or raw?

Dark Side
12-17-2005, 03:57 PM
About 2 1/2 inches. Any way yuo can set it up to be adjustable like the regular warp brackets? Black please. About how much do you think it would be? Thanks Luke.

luke
12-17-2005, 05:03 PM
I need the design parameters.

How much adjustment do you need, minimum and maximum? Do you want a 1 piece bracket or 2? Do you want it to mount like the brackets I make or like the factory ones? Do you want it powder coated?

Dark Side
12-17-2005, 05:11 PM
I'll draw the bracket up and send it to you. I want it powdercoated black, one piece design; and to mount like the factory's bracket mounts to the warp so the warp can be adjusted as needed but still be rigidly attached to the rail.

Dark Side
12-27-2005, 07:57 PM
got the specs taken care of, just having problems with my scanner.

luke
12-27-2005, 09:50 PM
OK. Post it here or PM it to me when you get the scanner going. :)

evildead420
04-05-2006, 03:49 PM
UP on some great stuff, will be making a purchase. :cheers:

Rudz
07-28-2006, 10:24 PM
got the stilleto drop in, i think the set screw holes are screwed up tho, i couldnt get the set screws in, and i think i stripped a hole, plus its thin, like we thought, so ill ship the bracket, and drop to u next week, plus, ill ship the warp as well for the led mod, and ill prolly get a couple 12 v mods, lol quite a list huh?, remember were striping the anno and powdercoat, great work luke, i love this guy!!!!!!

luke
07-29-2006, 09:04 AM
Sounds good. :)

Rudz
08-18-2006, 11:37 PM
love the work luke, this guys is so fast its rediculous,,, great guy!!!

luke
01-29-2007, 10:48 AM
up