starting up my mag

[two_four_878]

Okay I finally got my lvl 10 and ULT tuned so that it works. My only question is that when I air it up the sear doesn't come forward and I have to fiddle with the velocity adjuster to get it to come forward and be ready. Is this normal? Is there a recommended way to air up a mag?

[Ohms Law]

Yes, apply air pressure as quickly as possible. If you have a screw in tank with no on/off, screw it in quickly. If you have a screw in tank with an on/off turn the on/off on as quickly as possible (this might be a problem because some are hard to turn. The best method is an adjustable tank with an on/off like the Centerflag or Air America tanks.
Also, if it is a mechanical mag, hold the trigger in while applying air pressure.

[Aleis]

somtimes you can pull the trigger all the way back against the frame then let it Snap forawrd and it will reset the sear.