whats a good clamping feedneck

[ryan_1215]

hey guys I am looking for a high quality low rise angel threaded clamping feedneck to put on my mag, I know there are a lot of different ones out there so I would like to hear opinions on a few different ones. I know everyone is going to recomend rouge feednecks straight out and no offense to rouge and his good products but I want to hear what you guys think about other feednecks as well as his, I am really just after the best one I can find that looks sick on my mag. I am stongly considering the custom products one. I have a blue ule body and a blue pipe kit if that helps any. here is the link to my pic: http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=15388

[Pha|anx]

Shocktech and CCM, two of the best feednecks out there.

[BuyMyMag]

http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Q0dMXCpnKHtMKmjffhaM9CDBfXQTVLFlLdQ=?Pro ductID=BkPAqArbG88AAAECRWQ0F1qE


CCM Makes an AWESOME feedneck. Highly reccomended (sp?)

[ryan_1215]

I went to the shockteck site and they don't have an angel section, thanks for the advice on the ccm, that was one of the ones I was looking at too.

[Muzikman]

BartParts No-Rider

www.bartparts.com

http://www.automags.org/forums/showthread.php?t=167333&highlight=bartparts <-- there is a thread with a pic of my emag with a No-rider on it.

[TMAXXKING1]

sub-zero

http://www.automags.org/forums/showthread.php?t=173889 :bounce:

[rkjunior303]

BartParts No-Rider

www.bartparts.com

http://www.automags.org/forums/showthread.php?t=167333&highlight=bartparts <-- there is a thread with a pic of my emag with a No-rider on it.


QFT!

[magman007]

ccm or the hybrid headlok 2. both great feednecks

[ryan_1215]

I know the cp's are a lil fat but most of the guys at that I work/play with at my field and store swear by them. Also I am still up in the air about what color to go with, I have a blue ule body and blue tipped pipe if you didn't look at the pic above. I was thinking either blue black or nickel. not sure but still very open to suggestions. On a side note, played a few games with the mag today and it shot darts with draxxus blaze and my pipe. Most of the ppl didn't know what kind of gun it was (mostly noobs) but they thought it was a high end marker or an electro the was it was shooting and it was so accurate. I even had a few ppl ask me if I was shooting hot since I was putting ball on ball at almost 100 feet. Just thought I would toss in the mag plug there. thanks for any advice with my feedneck.

[Vex]

RPG Sub-Zero
Dude, you WILL NOT be disappointed with this feed neck!

Support your MagSmith!

[WickeDKlowN]

CCM or RPG.

[mixwell2]

I like my hybrid H2

[Tigwldr]

CP is making a nice twist lock system now. You have a piece that goes on the hopper and a piece that goes in the marker and the twist and lock together. They lock together really nice then when you want to tak the hopper off. Just push down and unlock it.

There are different locks for different hoppers so you don't have to do any sanding on it.

[Eric Cartman]

AKA makes a clamping feedneck for the ULE body. I got an AKA feedneck for my B2K4 and a CCM for my mag. I wish I'd known about the availability of the AKA before I bought the CCM. The AKA is cheaper and lower than the CCM and appears to be the same quality. I'd look into that if I was you.

scroll down a little for the feednecks:
http://www.akalmp.com/main.htm

[Muzikman]

AKA makes a clamping feedneck for the ULE body. I got an AKA feedneck for my B2K4 and a CCM for my mag. I wish I'd known about the availability of the AKA before I bought the CCM. The AKA is cheaper and lower than the CCM and appears to be the same quality. I'd look into that if I was you.

scroll down a little for the feednecks:
http://www.akalmp.com/main.htm


Hmmm, interesting...my guess is that those are the BartParts necks.

[gortman44]

i just put on a ccm no-pro, onto my mag. So very small. Looks great tooo. Those hybrids caught my eye.

[Eric Cartman]

Hmmm, interesting...my guess is that those are the BartParts necks.

Having looked at the bart parts pic, it sure looks a lot like what I've got on my bushy. Seems strange that AKA would be selling them though, considering the following:

AKALMP, Inc. no longer recognizes the following persons and entities as certified AKA technicians:
Dan Voils, AuctionJunkie DBN Paintball
Chris Herring, TargetIndy On Target Enterprises
Bart Hardwick, Bartman Bart Parts

But what do I know?

[Muzikman]

Well, see, i don't think they are selling necks that Bart made, but how much you want to bet they are made from the same CAD drawing. When Bart worked for AKA, he actually used the AKA machine shop to make his stuff.

[UTDragun]

Originally Posted by Muzikman
BartParts No-Rider

www.bartparts.com
QFT!
double QFT QFT

[TheTramp]

I use a CCM on almost all of my markers.

[cig858]

I would get a custom products twist lock neck.Best in the market.

[JAM]

I gotta vote for CCM or the Hybrid... I have had a couple of CCMs that i loved, but the quick-release feature on the Hybrid is sweet.

[Wassupstranger67]

My vote goes here!!! the best feed neck ever
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=71157&item=7164796860&rd=1

[MonsterMag]

Sub Zero Rules
I love mine so low so easy to use.
http://www.jayloo.com/files/pics/25000/100_1996_rs.JPG

[68magOwner]

lil brother had a ccm on his angel, very nice, i have a BP no rise on my viking, also very nice