View Full Version : Lvl. 10 Work With CO2?
SPECK
07-23-2005, 06:51 PM
I have a 68 Classic Valve. I run it on CO2. Will a Lvl. 10 work with this?
Thanks
SpitFire1299
07-23-2005, 07:22 PM
Yes.. but for sure wont work as good as it would with compressed air.
SPECK
07-23-2005, 07:26 PM
so it will work good.
It will work just fine in a classic as long as you take the usual precautions agains getting liquid CO2 in your gun.
lamingo
07-24-2005, 02:27 PM
I run Co2 through my Classic Mag with lvl 10 it works great no real problems
bigpoppa7979
07-25-2005, 04:10 PM
I'm running mine just fine, a few things to look out for though:
Tuning the lvl10 creates lots of leaks, make sure you have plenty of CO2 laying around and let your valve warm up between leaks. I spent 2 days tuning mine with a low tank. once I figured this out, I got it in a couple hours.
You will need to turn up your velocity quite a bit. This made my gun leak out the back. I can only run the shortest spring. The old regulator pistons were not made to handle the pressure of this velocity, a new piston will fix this. I have an old reg spring.
fshrmn76
07-25-2005, 06:35 PM
i had trouble tuning my level 10 with CO2 when i had the wrong size carrier in, the CO2 leaking by kept freezing the oring. tuned it with hpa and now it runs great on CO2, just find a friend that will let you borrow their tank
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.