PDA

View Full Version : RT pin picture


Kimmo
12-02-2001, 11:56 PM
Does anyone have a picture how the pin that extends into the regulator body should look like with all the o-rings and stuff.
My gune is modified so it would be interesting to see how it should look like.
Kimmo
12-03-2001, 01:16 AM
I looked at the cutaway-color pic. How many black spacers should there be on the valvepin??
There were some broken on mine...
Xzion
12-03-2001, 01:13 PM
Hey, got your email, I was thinking of the wrong pin, I'll go out and scan a pic of mine right now, not sure how well it'll look, but its worth a try.
Xzion
12-03-2001, 01:31 PM
Heres the pic of the RT Valve pin, its setup something like this going from left to right on the pic ive included.

5 Black washer looking discs
1 Larger brass washer
1 Urathane o-ring
1 Plastic spacer
1 Urathane o-ring
1 Tiny black washer (holds the unit together)
Russ
12-03-2001, 03:01 PM
Kimmo,

There are no "user servicable parts" in the reg pin. It must be replaced as an assembly. You'll need to order a new unit from AGD. Good luck.

From the AGD website...
Reg Valve Pin Assy - RT $27.00
Xzion
12-03-2001, 04:46 PM
There are no "user servicable parts" in the reg pin. It must be replaced as an assembly. You'll need to order a new unit from AGD. Good luck.

From the AGD website...
Reg Valve Pin Assy - RT $27.00

hey! I knew there was something I was forgot something I was gonna mention while I was scanning the valve pin! :D
BlueMagRT
12-03-2001, 08:31 PM
i replaced all of the o-ring on my reg pin.... is this a bad thing.
BlackVCG
12-04-2001, 12:30 AM
No, replacing the o-rings is fine. They include them and one of the plastic spacers in the parts kit.
Lord Vader
12-04-2001, 12:47 AM
How do you get the plastc spacer onto that pin?
Kimmo
12-04-2001, 06:19 AM
I called AGD. They will send the washers right away.
Thats good service!!!
My marker is the old RT. On that RT there should be 10
black spacers they told me at AGD. Xzion do you have a RT PRO??


LordVader: you will get them there if you take off
the small tiny thing. Carfully...
BlackVCG
12-04-2001, 10:01 AM
The plastic spacer has a cut in it so you can get it on the pin.
Xzion
12-04-2001, 11:10 AM
I actually have a ReTro Valve, but the RT PRO, the E-Mag and ReTro Valve are exactly the same, the only difference is the text on the side of the valve, which makes no significant difference at all, aside from perhaps cosmetic qualities.