MadPSIence
08-19-2005, 02:27 PM
(if I nix someones name... sorry.. I'm cramming a lot in)
Where's the community here?
Well I figure it was about time I've said it. I think the mag cult-following is just something else. There's so many people here on AO that have taken on the amazing original product from AGD and created a MASS of aftermarket and improvement. Honestly if not for some people around here... mags would be much more far and few here... now we STILL have new mag parts and features coming out which is amazing frankly. So in order here's some thank you's.
http://members.lycos.co.uk/richanderson929/Folks/0tom1.gif
First off thanks to AGD. Tom Kaye - the man. I don't think any other Prez has stood behind product the way Tom did. Tom's a genius and there's no question. I mean look what the old guy does in his spare time. I bet he'll build a time machine, go back in time, and assassinate the Gardener bros. (Someone should)
Anyways Tom, thanks for being the genius behind so many of AGD's amazing products, and for being a really down to earth and awesome guy for all the people who love AGD. That picture of you charging out on D-Day with 2 Sydarms is worth many thousand words
http://members.lycos.co.uk/richanderson929/Folks/0marcia1.gif
Oh who next.. ah Marcia! Yeah I couldn't leave you out of this. Though you didn't build the mag you helped keep the business smooth and flowing. AGD.. which was the #1 for a while must have been really busy and you were there. You're still here now and I think you're a really genuine, nice helpful lady. How many other companies do I know the office lady by name at? Hah, none. If I call Brass Eagle or SP I may get a redirect call to a guy named Ahmed Falafel in Pakistan. Thanks for treating us mag folk so good, and doing so even now.
So thanks a ton to AGD, everyone who was a part of it (I wish I knew everyone in the AGD scene... but I really haven't been around long enough to know... but thanks to those people)
On to the custom makers and sellers!! Alright... it's fact. The mag market would be dead if it weren't for these people. You know who you are. The people that make the awesome, high quality, custom, aftermarket parts for the mag. My next mag is going to have 2 AGD parts on it. The rest? You guys helped. That says a lot.
First off, because I didn't draw a goofy picture of him, Jay (aka. fireblade) here's to you for being a practical library of knowledge for us, and for always being helpful. You're also behind some great stuff for the mag such as the up and coming Pneumatic frame as well as your now-famous Fireblade triggers. I bet you're behind even more stuff.
Second, Mr. Tunaman (I wish I knew your name *embarassment*) Since I didn't pull off a goofy pic for ya you're right here. You make some seriously amazing custom mags and your products are no slouch. Anything Tuna-Made is going to be LIGHT and solid as heck. Thanks for also being a big help for the people around here that can't seem to find the answers anywhere else. I notice, when in doubt, people look for Tuna!
http://members.lycos.co.uk/richanderson929/Folks/0jason1.gif
Jason, (aka RogueFactor) I think as far as custom hard-parts go you set the bar here. Bodies, rails, grips, triggers, feednecks, VA's, adapters etc etc etc. All of it... perfect quality and done right. Who the hell does your anno? Give them a medal. Thanks a ton for making kickass stuff for us and making it so well.
http://members.lycos.co.uk/richanderson929/Folks/0ryan1.gif
Ryan (aka Coolhand), the man behind Logic Paintball. My praise comes to you heavily right now as you're creating probably the best mag upgrade ever produced outside of AGD. The Logic Ripper E-M Ultimate Mag-Frame is going to be something else and we all owe you applause for it and all of the other great products and custom work you offer. Not only have you made awesome mag parts but you make things for a ton of other guns and it is all solid.
http://members.lycos.co.uk/richanderson929/Folks/0chris1.gif
Chris, (aka GADevil) the man behind the Devils Den and the Devil Mag. Here's my thanks for kicking some life back into the mag market with your devil mag frames and frankly KICKASS grips. We've all been hurting for an electro solution!
Where's the community here?
Well I figure it was about time I've said it. I think the mag cult-following is just something else. There's so many people here on AO that have taken on the amazing original product from AGD and created a MASS of aftermarket and improvement. Honestly if not for some people around here... mags would be much more far and few here... now we STILL have new mag parts and features coming out which is amazing frankly. So in order here's some thank you's.
http://members.lycos.co.uk/richanderson929/Folks/0tom1.gif
First off thanks to AGD. Tom Kaye - the man. I don't think any other Prez has stood behind product the way Tom did. Tom's a genius and there's no question. I mean look what the old guy does in his spare time. I bet he'll build a time machine, go back in time, and assassinate the Gardener bros. (Someone should)
Anyways Tom, thanks for being the genius behind so many of AGD's amazing products, and for being a really down to earth and awesome guy for all the people who love AGD. That picture of you charging out on D-Day with 2 Sydarms is worth many thousand words
http://members.lycos.co.uk/richanderson929/Folks/0marcia1.gif
Oh who next.. ah Marcia! Yeah I couldn't leave you out of this. Though you didn't build the mag you helped keep the business smooth and flowing. AGD.. which was the #1 for a while must have been really busy and you were there. You're still here now and I think you're a really genuine, nice helpful lady. How many other companies do I know the office lady by name at? Hah, none. If I call Brass Eagle or SP I may get a redirect call to a guy named Ahmed Falafel in Pakistan. Thanks for treating us mag folk so good, and doing so even now.
So thanks a ton to AGD, everyone who was a part of it (I wish I knew everyone in the AGD scene... but I really haven't been around long enough to know... but thanks to those people)
On to the custom makers and sellers!! Alright... it's fact. The mag market would be dead if it weren't for these people. You know who you are. The people that make the awesome, high quality, custom, aftermarket parts for the mag. My next mag is going to have 2 AGD parts on it. The rest? You guys helped. That says a lot.
First off, because I didn't draw a goofy picture of him, Jay (aka. fireblade) here's to you for being a practical library of knowledge for us, and for always being helpful. You're also behind some great stuff for the mag such as the up and coming Pneumatic frame as well as your now-famous Fireblade triggers. I bet you're behind even more stuff.
Second, Mr. Tunaman (I wish I knew your name *embarassment*) Since I didn't pull off a goofy pic for ya you're right here. You make some seriously amazing custom mags and your products are no slouch. Anything Tuna-Made is going to be LIGHT and solid as heck. Thanks for also being a big help for the people around here that can't seem to find the answers anywhere else. I notice, when in doubt, people look for Tuna!
http://members.lycos.co.uk/richanderson929/Folks/0jason1.gif
Jason, (aka RogueFactor) I think as far as custom hard-parts go you set the bar here. Bodies, rails, grips, triggers, feednecks, VA's, adapters etc etc etc. All of it... perfect quality and done right. Who the hell does your anno? Give them a medal. Thanks a ton for making kickass stuff for us and making it so well.
http://members.lycos.co.uk/richanderson929/Folks/0ryan1.gif
Ryan (aka Coolhand), the man behind Logic Paintball. My praise comes to you heavily right now as you're creating probably the best mag upgrade ever produced outside of AGD. The Logic Ripper E-M Ultimate Mag-Frame is going to be something else and we all owe you applause for it and all of the other great products and custom work you offer. Not only have you made awesome mag parts but you make things for a ton of other guns and it is all solid.
http://members.lycos.co.uk/richanderson929/Folks/0chris1.gif
Chris, (aka GADevil) the man behind the Devils Den and the Devil Mag. Here's my thanks for kicking some life back into the mag market with your devil mag frames and frankly KICKASS grips. We've all been hurting for an electro solution!