The wait is over! Emag owners REJOICE!!!!

[Tunaman]

Here it is. Introducing the TUNABLADE! Genuine AGD Spec Emag/XMag trigger. No fumbling with silly set screws anymore. Gloss Black only. Not many in this batch so get 'um while you can. 39.99+ 3.00 first class shipping. Take the magnets out of your stock trigger and slap them in here. Magnets and magnet mount holder with oring are available at an additional cost if you need them. The new model has no bearing. I find that it is not worth the extra cash to make them. Comments welcome! Email tunaman5@comcast.net
http://www.tunamart.com/images/tuna/SFL_tunablade2.jpg
http://www.tunamart.com/images/tuna/XautomagX Tunablade.jpg

[X_Automag_X]

Tuna, is this trigger wider than the stock e-mag trigger kind of like a fireblade? Also, do you have some in stock right now, that you might me able to add to my baby which is currently in your possesion? :cheers:

[Tunaman]

Yes. A little wider...a little less wobble...a little less hassle to set up. In stock and ready for delivery now. :D

[A-Tach-One]

Looks great! Sent you an email. Thanks :cheers:

[X_Automag_X]

Yes. A little wider...a little less wobble...a little less hassle to set up. In stock and ready for delivery now. :D
Tuna, you scare me on how fast you get on and off of AO it's like your a ghost :eek: anyways, please add this to my order of goodies being done to my e-mag :D

[BigEvil]

Make sure you have a few at AONJ5. (and hold one for me)

[Willystyle21]

:eek: Well I might not get that Splinter trigger afterall. Tuna, I know you said gloss black only but will you do any other colors any time? I really want a blood red one for my Xmag. It would fit my anno design nicely.

[Tunaman]

There probably wont be any other colors till the second batch. ;)

[RoadDawg]

Wow... if only I didn't sell my emag. Ultra sexy... good job Tuna.

[SpecialBlend2786]

that looks incredible. nice job!

[Pha|anx]

WOW! :eek: Will definately want one.

How much for one with magnets?

[MonsterMag]

Holy **** :eek: :eek: :eek:

:dance:

[Tunaman]

WOW! :eek: Will definately want one.

How much for one with magnets?Well as you may well know, gluing up the trigger magnet mount with epoxy is a pain in the *** and takes 24 hrs to set up. Figure about another 12.00 for the 2 magnets and mount.

[Maggot6]

Bringing any to AO-Can?

[behemoth]

Bringing any to AO-Can?

yeah yeah, omfg.

Bring to ao can.

So i can hug you, err buy you a beer, this is amazing!

-Josh

:edit: How would you get the magnets out of the trigger? They're glued in, and recessed into the trigger.

And if heat would break the glue, it would also weaken the magnet.

[bunny5]

Tunaman: I would like to buy one. Do you accept paypal? Can you also add magnets onto the trigger for the extra fee. Thanks.

[rifleman wi]

Tuna-
im intrested in one.. but it wont be a while till i get my emag back.. will you for sure be making a second batch?.. if you are ill take one For Sure then...these triggers look sweet.. i just have other things to spend $ on right now.. let me know if theres goona be a second batch.. thanks..

Edit- Also .. i was wondering if you would beable to modify an existing Fireblade to have the sealed roller bearing for the trigger pin hole.. i would like to get rid of the wobble in that trigger too.. let me know please.. thanks..

[BlackVCG]

Is the bearing Torrington?

[Creative Mayhem]

Tuna... thats HAWT! I really thing i need to get one of these. Drop me a PM with an addy. thankx

[warbeak2099]

Where'd the pic go?

[TheTramp]

Holy good godness!!!!!!! :eek:

I MUST have one of these. I LOVE my Timmy trigger that has that shape and I know it'd really up the ante on my E-Mag.

Now the only delemma....I've wanted to put a red trigger on my black E-Mag (I love that look) so I might have to wait till the second batch. BUT I WANT IT NOW!!!!

[Willystyle21]

When do you plan on starting the second batch? colors offered? Screw it i'll just take one now.

[Carbon]

I will but one as soon as i get home. Tunaman, i will need to get your snailmail, as i dont have paypal.

do you take debit or credit card orders?

[Rudz]

Been waitin man
All gloss blk? I wanted 1 un annod so I could get it polished, maybe ill get 1 anyways, great work love my tunamax, and no I didn't sell the lowers man so don't hate me

[Hexis]

Is anything on the trigger pressed in? I would like to reanno it if not.

(if I mess it up, I mess it up, if it works black, it was good when I got it)

And where do I place the order?

[Tunaman]

Is anything on the trigger pressed in? I would like to reanno it if not.

(if I mess it up, I mess it up, if it works black, it was good when I got it)

And where do I place the order?Well sure. You press the bearing in. It aint no big thing. Email me tunaman5@comcast.net :rolleyes:

[Tunaman]

Just a couple of things...I suggest you leave the existing magnet in the top of your existing stock trigger and swing for a new one for the new trigger . This keeps both triggers in working order, just switch the trigger magnet mount with the center magnet to whatever trigger you want. Maybe I'll put the top magnet in all of them. You bums are payin' though... MAKE SURE your trigger can be adjusted and it isn't stripped out...make sure the allen wrench is ALL the way in before turning...You will also need a 1/8 inch punch and a hammer...or a small arbor press to switch the triggers correctly.:D ;)
OH YEA...THE ARBOR PRESS...Northern Tool has the small one for like 20.00. Every mag owner should have one... ;)

[MonsterMag]

I used a bench vice with a star head of my magnetic screw screwdriver. I used it to pry out the trigger pin. Works wonderfully. No nicking up you grip frame :headbang:

[Tunaman]

Been waitin man
All gloss blk? I wanted 1 un annod so I could get it polished, maybe ill get 1 anyways, great work love my tunamax, and no I didn't sell the lowers man so don't hate meI do have ONE raw one. Let me know if you want it. It has the top magnet epoxied in already and bearing installed. ;)

[Hexis]

Oh, really? Can I have it? I just sent you the paypal.

[bunny5]

http://www.jayloo.com/files/pics/30000/SFL_tunablade2.jpg

:)

[latches109]

nice slf, the trigger makes the gun!

[11 Bravo]

Just received mine!!!! Awesome :dance: :clap:

[Hexis]

Oh yeah:

http://www.visi.com/~mjb/Paintball/TunaBladeGreenEMag.jpg

It's working great.

[MicroMiniMe]

It's working great.

I'll have to see it in person when we get behind the flag this weekend and I hear the 'out, out, out, out, out, from all the guys you flank.

[Tunaman]

I am expecting more trigger magnet mounts any day now so if you haven't received you trigger yet expect it soon. Sorry for the delay... ;)

[Tunaman]

Oh yeah:

http://www.visi.com/~mjb/Paintball/TunaBladeGreenEMag.jpg

It's working great.pretty sick... glad you like it. ;)

[TheTramp]

I ordered one today. I'll put up a pic as soon as I get it (and install it ;) )

[11 Bravo]

Has anyone fired their marker with this trigger yet. I am waiting for a new battery for my mag so I want to know how it does now!

[Hexis]

I used my emag this weekend. The trigger is very nice. I like it a lot more than the stock trigger. I aslo discovered a feature I had not thought about. The shape allows you to get a finger behind the trigger. That's a nice little extra.

[behemoth]

I used my emag this weekend. The trigger is very nice. I like it a lot more than the stock trigger. I aslo discovered a feature I had not thought about. The shape allows you to get a finger behind the trigger. That's a nice little extra.

Woah, i hadnt thought about that!

That'd deffinatly prevent my gun from going off while running :ninja:

[HOMELANDEFENDER]

Count me in for black with the magnets mounted please. PM me with your address.

Thanks,

HLD...

[TheTramp]

It came in today!!!!! I'll put up pics as soon as I get it installed!

[Tunaman]

Few left...up. :D

[sleepingbeauty]

I need a black one with magnets installed for my acidwash emag. Please pm me your info with the price. I will take pics of my beast for all to see when I get it installed :headbang:

thanks-
Pat

[athomas]

I just got mine. It works great. I love the feel of this trigger. I can walk my emag faster than ever. Excellent job.

[Recon by Fire]

Yep, loving mine too :)

[Chrishew09]

Tuna-
Are you going to have these on your site once it is up and runnig?
When do you think your site will be up?
I just purchased my first Emag, and I want this trigger. :bounce:
Thanks,
Chrishew09

[sleepingbeauty]

I ordered mine today!!

I will take a pic of my emag once I get it installed.

thanks-
Pat

[Bulldog]

Wow. Very cool. How is it working out? I miss my x-mag.

[sleepingbeauty]

Got mine today, I will have it installed by tonight with pics up. I do have to say, I have the sexiest emag I have ever seen....

thanks-
Pat

[Tunaman]

Do you have many left Tuna? I think I have a few interested.
Sure do. About 6 left. Email me. ;)

[slateman]

I used my emag this weekend. The trigger is very nice. I like it a lot more than the stock trigger. I aslo discovered a feature I had not thought about. The shape allows you to get a finger behind the trigger. That's a nice little extra.

Forgive the n00b question, but I just got my first Emag. What does that do? How is that an advantage?

This is just for the trigger itself, right? Not the whole grip frame?

[Recon by Fire]

It is the trigger not teh whole frame. Changing the trigger obviously changes the way the trigger feel. I really like this new trigger over the stock double trigger. I find it easier to rip on then the original.

http://i17.photobucket.com/albums/b70/doublenot7/Paintball/TunaBlade-2.jpg

[A-Tach-One]

Did you have to adjust the trigger rod at all? Or did it drop right in?

Hey Rogue, With my Tunablade, I didn't have to mess with the trigger rod. It dropped right in there like it was meant to be. :cheers:

[psychowarden]

So, how much for one with magnets?

[Tunaman]

So, how much for one with magnets?63.99 shipped first class with all the magnets installed.

[Recon by Fire]

No adjusting to the trigger rod, just dropped it in and adjusted the magnets.

[behemoth]

Tuna, once i get my finances straightened, you'll be hearing from me :)

(i've been trying to afford this since it came out :p)

[HOMELANDEFENDER]

Just finished my install --- quality is top rate !!! I love it.

http://i2.photobucket.com/albums/y24/HOMELANDEFENDER/DSCF0006.jpg


HLD...

[PRPB]

Those of you that have this trigger have you used the fireblade. If so how does it compare? I currently have a fireblade, but I like the style of tunas trigger more.

Also I've never really messed with any other triggers besides the fireblade. The precision roller bearing does/ helps in what way?

[Loguzzzzzz]

I am interested in getting a blue Tunablade. When do you expect to have them available.
:hail:

[HOMELANDEFENDER]

Ive spoken with a few that have used both and they prefer their Tunablade.

I havent seen one in person with the bearings and trigger magnet mounts. But everyone I have spoken with has said it drops right in, uses your existing magnet mount(or you can buy one from Tuna) and there is no need to mess with the trigger rod putting it out of AGD spec.

I can say this much -- I sent mine out to AGD directly after installing it for a loose solenoid wire repair. I spoke to Troy, and asked if he could give my Mag a quick once over. I called for a follow up and asked if there were any issues with "tuning" the TunaBlade since I just dropped it in. He found no issue at all, and commented that it was a very nice design that functions as if it were a stock trigger....

I posted this small write up at PBOG.com:

http://www.pbownersgroup.com/forum/messageview.cfm?catid=732&threadid=2748&enterthread=y

HLD...

[X_Automag_X]

I recv'd my gun back from Tuna with my Tunablade installed/tuned, and it works great. Also, here is a picture for all to enjoy. I shall call her my "Dark Ripper" :D

http://x12.putfile.com/11/32409214871.jpg (http://www.putfile.com)

[HOMELANDEFENDER]

I recv'd my gun back from Tuna with my Tunablade installed/tuned, and it works great. Also, here is a picture for all to enjoy. I shall call her my "Dark Ripper" :D



Looks sinister.........I like it.

HLD...

[A-Tach-One]

Tuna, So you going to have red ones ready for Christmas? :D

[Tunaman]

Tuna, So you going to have red ones ready for Christmas? :D
I am trying for before christmas. I am only going to do a few red and blue so they will be a tad more than black. ;)

[sleepingbeauty]

http://img470.imageshack.us/img470/6876/dsc000040lj.jpg (http://imageshack.us)

[ultralight]

Tuna, that is really, really, really, ridiculously good looking.

when does the mech version come out? :D

[slateman]

Do you still have em? Backorder?

[A-Tach-One]

So Tuna, have any Tunablades with other colors of the rainbow on them yet, like red or blue? ;) :D

[Tunaman]

If anyone needs another color other than black, speak up now or forever hold your peace. ;)

[Loguzzzzzz]

Blue! Blue! Blue!

[REDRT]

If anyone needs another color other than black, speak up now or forever hold your peace.

What colors are you willing to do? I see you had blk,red, and blue. My emag is is a yellow/gold to a burnt orange fade. Could either of thoughs two colors be done?

[PsychoBaller]

Chock me up a Black one TUNA!

Also, as i put in the other post, I need your phone number till I get my cell fixed. Maybe I'll go to Cingular store today, maybe not. If anything I'll call you from home.

PM ME YOUR NUMBER, booya

-baller

[Dark Side]

Am I too late to ask for a red one. If so would you reanno it along with my Xmag?

[PsychoBaller]

Just talked with da Tuna. Black ones coming in next.

[REDRT]

My brother got his black one this week. It seems to be nice. I like it. Smooth and no excessive slop. Haven't seen mine yet. Maybe this week...

[Dark Side]

exchanged emails on the 14th. Tuna said the red ones would be done any time now. Can't take the anticipation.

[PsychoBaller]

Met TUNA over this past weekend for a Scenario Game... installed da TunaBlade into my SFL Emag.... and dannnngggggg that thing sings! So light n fast.

THANKS TUNA!!

You are the man.

[Dark Side]

Any update Tuna?

[Tunaman]

I expect these triggers any day now. I don't know what the heck is taking so long. There will be PLENTY of Black, 3 red, and 3 blue...

[Loguzzzzzz]

How much for the blue with shipping and is your website the best way to order/pay or is there another way.

LMK

[Tunaman]

same price for any color. Email is the best way for me. ;)

[A-Tach-One]

I expect these triggers any day now. I don't know what the heck is taking so long. There will be PLENTY of Black, 3 red, and 3 blue...

Expecting them any day now is great to hear. I have plans for 2 of your red ones! :D Are you going to be posting here when they are available, or should I pay you now? ;) Thanks

[Dark Side]

Expecting them any day now is great to hear. I have plans for 2 of your red ones! :D Are you going to be posting here when they are available, or should I pay you now? ;) Thanks

Glad I get the last red one then..... Tuna, I have gotten the macro I needed. What will be the final price on the red blade? I'll paypal you on wednesday.

[Loguzzzzzz]

Payment made, can't wait to get it! :D :headbang: :dance:

[REDRT]

Just installed mine last night. Liking it! Thanks Tuna...

[Dark Side]

Paid you yesterday. Can't wait.

[Tunaman]

They shipped to me today. Should be in my hands in 1-2 days. Triggers coming boys.... :D

[A-Tach-One]

They shipped to me today. Should be in my hands in 1-2 days. Triggers coming boys.... :D
Oh boy, red Tunablades for me! :clap: Now, which XMag will I put my black one on? :ninja:

[PsychoBaller]

TUNA! PayPal Payment sent. Thanks buddy!

[psychowarden]

I think I may end up getting one Tuna. I have been waiting on a Fireblade for 3 months, and in my book, thats a bit too long so I sent Ryan an E-mail asking for a refund, and Im gonna be picking up a Black Tunablade.

[psychowarden]

I just sent the payment today for one black Tunablade with magnets shipped.

[A-Tach-One]

Red Tunablades installed. :cheers: Thanks
http://www.jayloo.com/files/pics/34000/SFLRed_tn.JPG (http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=34575)
http://www.jayloo.com/files/pics/34000/BlkEuroDone_tn.JPG (http://www.jayloo.com/photo_gallery/show_pic.html?pIMAGE_ID=34576)

[Alpha]

I got one second hand, and I must say, it rocks!

Buy now!

[Dark Side]

Tuna, got mine today and it looks great. Leaving you feedback. Can't wait to get the ano done so it all comes togeather. Thanks.

ATach, I'm digging that black Xmag setup. Had something similiar envisioned for mine.

[p8ntball72]

Up..... Email sent :hail:

[hobbesTZ]

How much extra would it be for a blue trigger?

[Tunaman]

Blue is gone. Black is beautiful.

[cowboy_00]

Anyway to get raw trigger? or take the black off one of the current ones?

[Tunaman]

Anyway to get raw trigger? or take the black off one of the current ones?You can have it stripped if you like... ;)

[cowboy_00]

Would you strip it? or would i have to take it to my friend the polish and anodizer?

[NoLifeLeft]

So, Tunablades are still $63.99 shipped? Do you take money orders? I'm good for a black one. :D

[Tunaman]

Would you strip it? or would i have to take it to my friend the polish and anodizer?
Yes. Take it to him. That would be better.

[Tunaman]

So, Tunablades are still $63.99 shipped? Do you take money orders? I'm good for a black one. :DYes. Email me at tunaman5@comcast.net

[NoLifeLeft]

Sent you an E-mail. PM me if you don't recieve it. My net is actin' a little funny. :mad:

[Dark Frost17]

looks Great but how would i change it :confused:

[cocker_mag21]

clear your PM's tuna..lol trying to hit u up.. BTW that trigger ROCKS

[psychowarden]

Great stuff Tuna. But Im having troubles with my X-mag while its in mech mode. It seems like the trigger is not pushing the pin far enough back.

[Tunaman]

Maybe someone has messed with the trigger rod? Measure it and let me know.

[psychowarden]

What do you mean by measure? As far, Duzzy had it tuned by you right before I bought it. Where should I measure from?

[Tunaman]

Well the sear would be fine then if I just looked at it. You have a full tank?

[psychowarden]

The first time I tested it, mostly full, about 2000psi, but recently, its just been 1000psi fills or so because my scuba tank is getting really low. It works just fine in elctro mode, and it was shooting great in mech with the stock trigger. Is it possible that I will have to adjust it?

[Tunaman]

well your would be the first that needed adjustment so I dunno. Wanna send it here and I'll take a look at it?

[psychowarden]

I may be able to. Would I need to send the whole gun or just the frame?

I will be sure to test it out this weekend with a full tank.

Just to explain things a bit better. It seems like its not pushing the sear down far enough. I can hear a bit of gas escape, but then the pin just snaps back into place without cycling the marker.

[NoLifeLeft]

Thank you Tunaman! Installation was a breeze. My E-Mag finally shoots the way I always wanted it to. :clap:
It's like a whole new gun now. :shooting:

[Tunaman]

;) :D

[slateman]

Still making these? Where (or can I?) do I send a paypal payment?

[Tunaman]

Still making these? Where (or can I?) do I send a paypal payment?sure. paypal tunaman5@comcast.net

[syl58]

still have black ones in stock? need one; i can take the magnets and mounts from the stock trigger right?

[Tunaman]

I installed the top magnet already. Just switch your middle magnet mount from your old one and adjust.

[psychowarden]

Just to let you know, the top magnet may be reversed. I have had several people tell me they have had the same thing. Its nothing to panick about and its an easy fix. Just thought I would let you know about that Tuna.

[syl58]

but you have some in stock right now?

[Tunaman]

Just to let you know, the top magnet may be reversed. I have had several people tell me they have had the same thing. Its nothing to panick about and its an easy fix. Just thought I would let you know about that Tuna.There is no difference in the way the top magnet gets installed. If it doesn't return the trigger then flip the one in the frame over...

[Tunaman]

but you have some in stock right now?yes...in stock.

[syl58]

how much without the magnet and mount shipped? and paypal address?

[syl58]

53.00 paypal sent

[Fish]

Your PM's are full Tuna.

E-mail sent.

[psychowarden]

There is no difference in the way the top magnet gets installed. If it doesn't return the trigger then flip the one in the frame over...


Exactly what I did. I had the occasional problem with the bottom magnet screw slipping, but again an easy fix with a little blue Loctite. In all, a wonderful addition and I would reccomend it to anyone.

[mag-owner]

sent you my emag for trigger install and valve tune. :)