Sigh, leaking down the barrel

[blackduck]

Hi, i'm still leaking down the barrel. Thought maybe the power tube spacer kit would help, installed the .215, still no luck. I ave the Hurricane Valve and ANS Stainless bolt... i think its that setup, was just wondering what u guys thought or if ya had any input. I suppose ill re-install the (stock) internals and just put a foamie on the AGD bolt.

[PyRo]

Ditch the ans, that could be causing it. Also check the PT o-ring.

[The Mag Man]

Its gotta be that craptacular bolt. Get rid of that ghetto bolt and pop your stock back in.

[blackduck]

Thanks, ill get some air tomorrow and see if it fixes the prob.

[crd945]

Good advice, definitely use all of the stock AGD internals and your problem should be fixed. If that doesnt work, send your valve into agd if you have any stars left

[deded]

I don't know if you have the video or not... but its really helpful.

It says if you have a leak, it is either the powertube or the on/off.

Pull the trigger and keep it down. If it still leaks it is most likely the on/off.

If it doesn't, its probably the powertube.

Good luck!