PDA

View Full Version : When Parts dont seem to fit while paintballing...


AGDlover
10-16-2005, 10:38 AM
Ok well I bought a FBM power angle off a ref at my local field for 5 bux he had never used it so I took it in a heart beat. While installing it there at pratice, The end of it seemed to interfere with my wing nut on my NW QD setup...well only one thing could solve this problem with veary few parts and tools avaible to me at the time....Spacers to get it to separate from the wing nut so it would still be able to be used... So seaching though my tool box I came accrost 2 parts that were the perfect size, and I had no need for them anylonger. They were Power Tube lvl7 spacers. As for the CP rail and the power angle gap that was because the screws i was useing were the wrong ones so they suck out and created the gap but still worked non the less. Well here it is. I loved the power angle, it deff lowered my gun and was veary comfy.
PICS!!! :clap:
<a href="http://www.jayloo.com/files/pics/31000/IMG_2451.JPG"> <img src="http://www.jayloo.com/files/pics/31000/IMG_2451_rs.JPG" width="640" height="480"> </img></a>
<a href="http://www.jayloo.com/files/pics/31000/IMG_2452.JPG"> <img src="http://www.jayloo.com/files/pics/31000/IMG_2452_rs.JPG" width="640" height="480"> </img></a>
<a href="http://www.jayloo.com/files/pics/31000/IMG_2448.JPG"> <img src="http://www.jayloo.com/files/pics/31000/IMG_2448_rs.JPG" width="640" height="480"> </img></a>
GT
10-16-2005, 12:06 PM
power angles rule. I have had one on each gun since they came out. Very effective to keep the guns mass closer to your body.
behemoth
10-16-2005, 12:34 PM
you just keep making that thing weirder and weirder.
AGDlover
10-16-2005, 01:26 PM
you just keep making that thing weirder and weirder.


And you dont even know what I have planed for other mags hehe
Automaggot68
10-16-2005, 03:20 PM
Man, I'd be really careful with the setup.
That thing like like it could snap, bend, flex, etc with enough force.
AGDlover
10-16-2005, 04:12 PM
ya what i want to do is eliminate the CP rail so I wan to get the Power angle Dove tailed and have set screws and stuff so i could put my tank on it. It seems pritty solid at the momment
Automaggot68
10-16-2005, 05:07 PM
ya what i want to do is eliminate the CP rail so I wan to get the Power angle Dove tailed and have set screws and stuff so i could put my tank on it. It seems pritty solid at the momment

To be perfectly honest with you, I'd ditch the NW quick disconnect and stick with just the power angle and the CP rail.
AGDlover
10-16-2005, 05:19 PM
To be perfectly honest with you, I'd ditch the NW quick disconnect and stick with just the power angle and the CP rail.


Ya I may since most of the stuff will be on the b2k4 when i get it but its always been nice cause my warp is QD on it too
MarkM
10-16-2005, 06:23 PM
Not thought of mounting the NWQD the other way around, you wouldn't need the spacers then.
AGDlover
10-16-2005, 06:26 PM
Yes I have thought about it but it will not work due to where the hole is drilled and if i turned the entire QD system around the wing nut would hit the frame.