Old classic valve leaking by the back of the regs!!!

[TaB3rNaK]

when the velocity is around 200 fps the gun is not leaking but , if i turn it up the gun start leaking by the hole in the back of the reg. need help plz

THx

[AGDlover]

sounds like your reg piston oring is shot pick a new one up at www.airgun.com

[barjohn]

The Regulator Piston comes as an assembly. DO NOT take this apart. It has a built in blow off valve that will leak air if your marker becomes over pressurized. The blow off resets once your pressure goes back to normal. This safety feature is found exclusively in AGD markers. Replace the entire assembly if your marker is shooting at normal speeds and it still leaks out the back.



thats directly from air gun designs look here http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=30&categoryID=18

[AGDlover]

The Regulator Piston comes as an assembly. DO NOT take this apart. It has a built in blow off valve that will leak air if your marker becomes over pressurized. The blow off resets once your pressure goes back to normal. This safety feature is found exclusively in AGD markers. Replace the entire assembly if your marker is shooting at normal speeds and it still leaks out the back.



thats directly from air gun designs look here http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=30&categoryID=18


He just needs the oring that goes on the outside. They are talking about removeing the internal of the piston. the Oring is ok to replace as long as its bought and made for the reg piston for your piticular valve.