View Full Version : help! rear stripped frame screw! (DM4)
master_alexander
11-17-2005, 05:55 PM
ive had stripped screws before, but i have never had one like this where you dont have as much clearance for an allen wrench or drill.
what method should i use to get out the screw?
AGDlover
11-17-2005, 07:30 PM
weld a new head onto it and out she comes
wanna-b-ballin'
11-17-2005, 08:17 PM
dremmel a slot in it, and use a short screw driver.
or epoxy a allen wrench in it, then try.
atm743
11-17-2005, 08:20 PM
well i dout that i would try this but i have tooken a hammer and either a philips screw driver and making a indent in the screw the twist it out but i dout that you will be able to do that
i say wither weld the alen into the screw enough to screw the screw off.
and the go to your hardware store and by a thread tap
dsrkd
11-18-2005, 01:22 AM
atm 'tooken'?
As wanna stated, epoxy an allen wrench into the screw. Let it harden and then unscrew it. You lose an allen wrench but you remove the screw.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.