To warp a MAGingbird

[buzzboy]

I have been doing some thinking and I think that the gun I have right now isn't my style. It is cool having 15bps under my fingers and a trigger pull like walking a table but its just not for me. That is why this winter or in the spring I will be looking into getting a new gun. Preferably a minimag. I have a warp and I am wondering how I will be able to warp a minimag. Is it a different body or is it a special peice that attaches to the PF. If it is a special piece is it somewhere in this picture.
http://tnight.net/photos/md/92985.jpg

[SCpoloRicker]

You're pic link is dead. :)

There are a few options to mount a warpfeed; getting it on your minimag shouldn't be a problem. Check out the AGD store as well as the Dealers sub-section of the forum.

/*golfclap* for the thread title :clap:

[Geoff Call]

Warp comes with parts to work with any powerfeed:)

[buzzboy]

I'll try to get the link working. It works right for me. Let me try a different host.

[zackzel]

Pics are working for me, and you have all the pieces there you need to link it to a minimag.

[buzzboy]

Great. That means that I'll have a warped minimag. Woo hoo.

Also, to have the hopper on the left side of the gun I would want a PF Right body correct?

[Chris_automag_07]

If you are planning on hooking into the bottom of the powerfeed tube.

[wanna-b-ballin']

gimme a day, and i'll get another pic of how i had it done.

i had the warp on the left side, with a powerfeed hopper right minimag body. the hose just ran straight from the warp up into the bottom of the feedtube. really compact.

[luke]

This is how I do it.
http://www.lukescustoms.com/WFO_Tuna_rail.JPG

http://www.lukescustoms.com/Warp_mod_release.JPG

[wanna-b-ballin']

This is how I do it.
http://www.lukescustoms.com/WFO_Tuna_rail.JPG

http://www.lukescustoms.com/Warp_mod_release.JPG


wow, i see your posting your custom work alot now days; are you running low on business?

[Automaggot68]

wow, i see your posting your custom work alot now days; are you running low on business?


There's no shortage of work for luke, and from your post
There's no shortages of idiots on AO.

[luke]

wow, i see your posting your custom work alot now days; are you running low on business?

Actually, no, business is great.

"Preferably a minimag. I have a warp and I am wondering how I will be able to warp a minimag. Is it a different body or is it a special peice that attaches to the PF. If it is a special piece is it somewhere in this picture."

Is there something wrong with answering a question?

[wanna-b-ballin']

no, i was just curious. i just noticed in the last few days, alot of threads have your pics in them. i mean, more than usual.

[warpspyder]

Go with the warp. You'll love it :D

[SCpoloRicker]

wow, i see your posting your custom work alot now days; are you running low on business?

Dude, you're an idiot.

[logicmag19]

no, i was just curious. i just noticed in the last few days, alot of threads have your pics in them. i mean, more than usual.
and that means his business is bad?

by the way good job gettin a mini, hope you enjoy it!

[luke]

no, i was just curious. i just noticed in the last few days, alot of threads have your pics in them. i mean, more than usual.

:)
Actually I rarely "plug" my products, more often that not I don't. I don't even announce new products in Paintball Talk which is acceptable by the rules. If people are looking for options and I happen to have one, and it hasn't been mentioned, I will. I'm not sure why (or if) that is a problem. I would wager most people come here for information, can't see the harm supplying that.

If the truth be known, the feed tube mods I do should cost 3x the current price because of the amount of time they take to do, hummm, I wonder why I even do them?
:)

[Chronobreak]

luke, its cool..


btw no one says anything when tis another dealer throwing stuff out.. :ninja:

anyways, i say get a hopepr right p/f left if you want the warp on the left inside, otherwise get the hopper right p/f left and put the warp on the otherside

best bet is to just get the larger parabolic p/f plug and stick that in, although the profile will be like 1" from the nub of the p/f it is definetely a VERY low profile, and you could get the body cut if you so chose to do so

[wanna-b-ballin']

this is how i had it.
http://img340.imageshack.us/img340/7315/img09471vh.jpg

on the left side of the gun with a powerfeed hopper right.

[buzzboy]

Thats probably how I would do it.

A few more thoughts. Which do you think is cooler. A p/f micro or a p/f mini. I like the length and body porting of the mini a lot more than the look of the micro but I already have an Autococker threaded UL that I really like. And I mean it isn't butt ugly I just like the mini better.

Well, I'll see when the time comes. What ever they will trade me for. In the end I want to have a warped p/f left micro or minimag with a Y frame. Twill be sick :headbang:

[nate2k191]

ule- YAY

http://img514.imageshack.us/img514/1413/resizeofimg20494rb.jpg

i feel so exposed whenever i use a marker without warp :tard:

[wanna-b-ballin']

having a big drop on it with a warp is nice too, because then you dont need a gun stand :)