PDA

View Full Version : RT Pro issues,



wzyrddy
01-11-2006, 05:52 PM
I have a Rt Pro with the lvl 10 and the ULE with 5 shims. I cant get the trigger to sweetspot ar react at all. Any ideas?

Cow hunter
01-11-2006, 06:04 PM
ULE needs to have a total of 9 shims to sweetspot normal shim equals 2 ULT shims

so you need a combo

3 normal shims = 6 ULT shims
so 4 normal shims and one ULT will make it sweetspot, or any other combo
any more than 9 could cause problems, such as the valve not sliding into the body

when i did this i was only get it to work once, which was WOH sweet but then i couldnt seem to get it again.
/note; you need to have a nice/perfectly tuned lvl10 or bolt stick might be a big issue

Dayspring
01-11-2006, 06:35 PM
Take out the ULT. You'll get a better response.

lifeguard_12_86
01-11-2006, 06:59 PM
make sure your not running lp tank, and that you dont have anything retricting your air line, i had a bad evil on/off and had the same prob till i went back to my old regular screrrw in and she worked like a dream