PDA

View Full Version : Emag won't fire fast


stakeman
01-25-2006, 05:39 PM
I have a emag that shoots fine when I shoot slowly, but as soon as I start firing fast the level ten sounds like it kicks in and eventually the blot sticks. I am running it at 950psi and lubed the on/off and level ten, battery is charged. So I am out of answers never had this kind of problem before. Help pl :confused: ease
BigEvil
01-25-2006, 05:49 PM
Have you chrono'd it lately? What happens when you turn up the velocity? Does it still have the problem when you do?

If the gun is at the proper velocity, then it sounds like your lvl 10 carrier is a little too small. Try the next size up.
stakeman
01-25-2006, 05:56 PM
Have you chrono'd it lately? What happens when you turn up the velocity? Does it still have the problem when you do?

If the gun is at the proper velocity, then it sounds like your lvl 10 carrier is a little too small. Try the next size up.


Chrono'd it sunday and I tried the carrier with a new oring, but it still does it. It worked perfect Sunday and the only thing I did was change from micro line to braded. Could that do it?
rb211
01-25-2006, 07:18 PM
What kind of hopper are you using? if it is not feeding balls fast enough, then the LVL X is doing it's job.
stakeman
01-25-2006, 07:26 PM
This is just dry firing.
REDRT
01-25-2006, 07:33 PM
Maybe the field stripe screw too tight causing a binding issue with the bolt?
stakeman
01-25-2006, 07:40 PM
Maybe the field stripe screw too tight causing a binding issue with the bolt?
just hand tightened. I am going to try putting the micro line back on thought I can't see why this would effect it unless a the lines differ that much in size that I am lossing volicity.
stakeman
01-25-2006, 08:34 PM
Got it. Something was starving the valve in the line so I swiched it back. Thanks
psychowarden
01-25-2006, 11:11 PM
If you were infact using Microline and not Macro, than that could be a problem. The Micro line is sometimes not a high enough flow.
REDRT
01-26-2006, 11:57 PM
Got it. Something was starving the valve in the line so I swiched it back. Thanks

What was it? Teflon tape maybe? Just currious.
whistl3r
01-27-2006, 01:19 AM
crap. i just switched from ss braided to microline.. i hope i can still get a decent bps..